cfg80211: move all regulatory hints to workqueue
[linux-2.6] / drivers / net / wireless / adm8211.c
1
2 /*
3  * Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP)
4  *
5  * Copyright (c) 2003, Jouni Malinen <j@w1.fi>
6  * Copyright (c) 2004-2007, Michael Wu <flamingice@sourmilk.net>
7  * Some parts copyright (c) 2003 by David Young <dyoung@pobox.com>
8  * and used with permission.
9  *
10  * Much thanks to Infineon-ADMtek for their support of this driver.
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation. See README and COPYING for
15  * more details.
16  */
17
18 #include <linux/init.h>
19 #include <linux/if.h>
20 #include <linux/skbuff.h>
21 #include <linux/etherdevice.h>
22 #include <linux/pci.h>
23 #include <linux/delay.h>
24 #include <linux/crc32.h>
25 #include <linux/eeprom_93cx6.h>
26 #include <net/mac80211.h>
27
28 #include "adm8211.h"
29
30 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
31 MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");
32 MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211");
33 MODULE_SUPPORTED_DEVICE("ADM8211");
34 MODULE_LICENSE("GPL");
35
36 static unsigned int tx_ring_size __read_mostly = 16;
37 static unsigned int rx_ring_size __read_mostly = 16;
38
39 module_param(tx_ring_size, uint, 0);
40 module_param(rx_ring_size, uint, 0);
41
42 static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
43         /* ADMtek ADM8211 */
44         { PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */
45         { PCI_DEVICE(0x1200, 0x8201) }, /* ? */
46         { PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */
47         { PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */
48         { 0 }
49 };
50
51 static struct ieee80211_rate adm8211_rates[] = {
52         { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
53         { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
54         { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
55         { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
56         { .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
57 };
58
59 static const struct ieee80211_channel adm8211_channels[] = {
60         { .center_freq = 2412},
61         { .center_freq = 2417},
62         { .center_freq = 2422},
63         { .center_freq = 2427},
64         { .center_freq = 2432},
65         { .center_freq = 2437},
66         { .center_freq = 2442},
67         { .center_freq = 2447},
68         { .center_freq = 2452},
69         { .center_freq = 2457},
70         { .center_freq = 2462},
71         { .center_freq = 2467},
72         { .center_freq = 2472},
73         { .center_freq = 2484},
74 };
75
76
77 static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
78 {
79         struct adm8211_priv *priv = eeprom->data;
80         u32 reg = ADM8211_CSR_READ(SPR);
81
82         eeprom->reg_data_in = reg & ADM8211_SPR_SDI;
83         eeprom->reg_data_out = reg & ADM8211_SPR_SDO;
84         eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK;
85         eeprom->reg_chip_select = reg & ADM8211_SPR_SCS;
86 }
87
88 static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom)
89 {
90         struct adm8211_priv *priv = eeprom->data;
91         u32 reg = 0x4000 | ADM8211_SPR_SRS;
92
93         if (eeprom->reg_data_in)
94                 reg |= ADM8211_SPR_SDI;
95         if (eeprom->reg_data_out)
96                 reg |= ADM8211_SPR_SDO;
97         if (eeprom->reg_data_clock)
98                 reg |= ADM8211_SPR_SCLK;
99         if (eeprom->reg_chip_select)
100                 reg |= ADM8211_SPR_SCS;
101
102         ADM8211_CSR_WRITE(SPR, reg);
103         ADM8211_CSR_READ(SPR);          /* eeprom_delay */
104 }
105
106 static int adm8211_read_eeprom(struct ieee80211_hw *dev)
107 {
108         struct adm8211_priv *priv = dev->priv;
109         unsigned int words, i;
110         struct ieee80211_chan_range chan_range;
111         u16 cr49;
112         struct eeprom_93cx6 eeprom = {
113                 .data           = priv,
114                 .register_read  = adm8211_eeprom_register_read,
115                 .register_write = adm8211_eeprom_register_write
116         };
117
118         if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) {
119                 /* 256 * 16-bit = 512 bytes */
120                 eeprom.width = PCI_EEPROM_WIDTH_93C66;
121                 words = 256;
122         } else {
123                 /* 64 * 16-bit = 128 bytes */
124                 eeprom.width = PCI_EEPROM_WIDTH_93C46;
125                 words = 64;
126         }
127
128         priv->eeprom_len = words * 2;
129         priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL);
130         if (!priv->eeprom)
131                 return -ENOMEM;
132
133         eeprom_93cx6_multiread(&eeprom, 0, (__le16 *)priv->eeprom, words);
134
135         cr49 = le16_to_cpu(priv->eeprom->cr49);
136         priv->rf_type = (cr49 >> 3) & 0x7;
137         switch (priv->rf_type) {
138         case ADM8211_TYPE_INTERSIL:
139         case ADM8211_TYPE_RFMD:
140         case ADM8211_TYPE_MARVEL:
141         case ADM8211_TYPE_AIROHA:
142         case ADM8211_TYPE_ADMTEK:
143                 break;
144
145         default:
146                 if (priv->pdev->revision < ADM8211_REV_CA)
147                         priv->rf_type = ADM8211_TYPE_RFMD;
148                 else
149                         priv->rf_type = ADM8211_TYPE_AIROHA;
150
151                 printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n",
152                        pci_name(priv->pdev), (cr49 >> 3) & 0x7);
153         }
154
155         priv->bbp_type = cr49 & 0x7;
156         switch (priv->bbp_type) {
157         case ADM8211_TYPE_INTERSIL:
158         case ADM8211_TYPE_RFMD:
159         case ADM8211_TYPE_MARVEL:
160         case ADM8211_TYPE_AIROHA:
161         case ADM8211_TYPE_ADMTEK:
162                 break;
163         default:
164                 if (priv->pdev->revision < ADM8211_REV_CA)
165                         priv->bbp_type = ADM8211_TYPE_RFMD;
166                 else
167                         priv->bbp_type = ADM8211_TYPE_ADMTEK;
168
169                 printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n",
170                        pci_name(priv->pdev), cr49 >> 3);
171         }
172
173         if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) {
174                 printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n",
175                        pci_name(priv->pdev), priv->eeprom->country_code);
176
177                 chan_range = cranges[2];
178         } else
179                 chan_range = cranges[priv->eeprom->country_code];
180
181         printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
182                pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
183
184         BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
185
186         memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
187         priv->band.channels = priv->channels;
188         priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
189         priv->band.bitrates = adm8211_rates;
190         priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
191
192         for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
193                 if (i < chan_range.min || i > chan_range.max)
194                         priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
195
196         switch (priv->eeprom->specific_bbptype) {
197         case ADM8211_BBP_RFMD3000:
198         case ADM8211_BBP_RFMD3002:
199         case ADM8211_BBP_ADM8011:
200                 priv->specific_bbptype = priv->eeprom->specific_bbptype;
201                 break;
202
203         default:
204                 if (priv->pdev->revision < ADM8211_REV_CA)
205                         priv->specific_bbptype = ADM8211_BBP_RFMD3000;
206                 else
207                         priv->specific_bbptype = ADM8211_BBP_ADM8011;
208
209                 printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n",
210                        pci_name(priv->pdev), priv->eeprom->specific_bbptype);
211         }
212
213         switch (priv->eeprom->specific_rftype) {
214         case ADM8211_RFMD2948:
215         case ADM8211_RFMD2958:
216         case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
217         case ADM8211_MAX2820:
218         case ADM8211_AL2210L:
219                 priv->transceiver_type = priv->eeprom->specific_rftype;
220                 break;
221
222         default:
223                 if (priv->pdev->revision == ADM8211_REV_BA)
224                         priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER;
225                 else if (priv->pdev->revision == ADM8211_REV_CA)
226                         priv->transceiver_type = ADM8211_AL2210L;
227                 else if (priv->pdev->revision == ADM8211_REV_AB)
228                         priv->transceiver_type = ADM8211_RFMD2948;
229
230                 printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n",
231                        pci_name(priv->pdev), priv->eeprom->specific_rftype);
232
233                 break;
234         }
235
236         printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d "
237                "Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type,
238                priv->bbp_type, priv->specific_bbptype, priv->transceiver_type);
239
240         return 0;
241 }
242
243 static inline void adm8211_write_sram(struct ieee80211_hw *dev,
244                                       u32 addr, u32 data)
245 {
246         struct adm8211_priv *priv = dev->priv;
247
248         ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR |
249                           (priv->pdev->revision < ADM8211_REV_BA ?
250                            0 : ADM8211_WEPCTL_SEL_WEPTABLE ));
251         ADM8211_CSR_READ(WEPCTL);
252         msleep(1);
253
254         ADM8211_CSR_WRITE(WESK, data);
255         ADM8211_CSR_READ(WESK);
256         msleep(1);
257 }
258
259 static void adm8211_write_sram_bytes(struct ieee80211_hw *dev,
260                                      unsigned int addr, u8 *buf,
261                                      unsigned int len)
262 {
263         struct adm8211_priv *priv = dev->priv;
264         u32 reg = ADM8211_CSR_READ(WEPCTL);
265         unsigned int i;
266
267         if (priv->pdev->revision < ADM8211_REV_BA) {
268                 for (i = 0; i < len; i += 2) {
269                         u16 val = buf[i] | (buf[i + 1] << 8);
270                         adm8211_write_sram(dev, addr + i / 2, val);
271                 }
272         } else {
273                 for (i = 0; i < len; i += 4) {
274                         u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) |
275                                   (buf[i + 2] << 16) | (buf[i + 3] << 24);
276                         adm8211_write_sram(dev, addr + i / 4, val);
277                 }
278         }
279
280         ADM8211_CSR_WRITE(WEPCTL, reg);
281 }
282
283 static void adm8211_clear_sram(struct ieee80211_hw *dev)
284 {
285         struct adm8211_priv *priv = dev->priv;
286         u32 reg = ADM8211_CSR_READ(WEPCTL);
287         unsigned int addr;
288
289         for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++)
290                 adm8211_write_sram(dev, addr, 0);
291
292         ADM8211_CSR_WRITE(WEPCTL, reg);
293 }
294
295 static int adm8211_get_stats(struct ieee80211_hw *dev,
296                              struct ieee80211_low_level_stats *stats)
297 {
298         struct adm8211_priv *priv = dev->priv;
299
300         memcpy(stats, &priv->stats, sizeof(*stats));
301
302         return 0;
303 }
304
305 static int adm8211_get_tx_stats(struct ieee80211_hw *dev,
306                                 struct ieee80211_tx_queue_stats *stats)
307 {
308         struct adm8211_priv *priv = dev->priv;
309
310         stats[0].len = priv->cur_tx - priv->dirty_tx;
311         stats[0].limit = priv->tx_ring_size - 2;
312         stats[0].count = priv->dirty_tx;
313
314         return 0;
315 }
316
317 static void adm8211_interrupt_tci(struct ieee80211_hw *dev)
318 {
319         struct adm8211_priv *priv = dev->priv;
320         unsigned int dirty_tx;
321
322         spin_lock(&priv->lock);
323
324         for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) {
325                 unsigned int entry = dirty_tx % priv->tx_ring_size;
326                 u32 status = le32_to_cpu(priv->tx_ring[entry].status);
327                 struct ieee80211_tx_info *txi;
328                 struct adm8211_tx_ring_info *info;
329                 struct sk_buff *skb;
330
331                 if (status & TDES0_CONTROL_OWN ||
332                     !(status & TDES0_CONTROL_DONE))
333                         break;
334
335                 info = &priv->tx_buffers[entry];
336                 skb = info->skb;
337                 txi = IEEE80211_SKB_CB(skb);
338
339                 /* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */
340
341                 pci_unmap_single(priv->pdev, info->mapping,
342                                  info->skb->len, PCI_DMA_TODEVICE);
343
344                 ieee80211_tx_info_clear_status(txi);
345
346                 skb_pull(skb, sizeof(struct adm8211_tx_hdr));
347                 memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen);
348                 if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) &&
349                     !(status & TDES0_STATUS_ES))
350                         txi->flags |= IEEE80211_TX_STAT_ACK;
351
352                 ieee80211_tx_status_irqsafe(dev, skb);
353
354                 info->skb = NULL;
355         }
356
357         if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2)
358                 ieee80211_wake_queue(dev, 0);
359
360         priv->dirty_tx = dirty_tx;
361         spin_unlock(&priv->lock);
362 }
363
364
365 static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
366 {
367         struct adm8211_priv *priv = dev->priv;
368         unsigned int entry = priv->cur_rx % priv->rx_ring_size;
369         u32 status;
370         unsigned int pktlen;
371         struct sk_buff *skb, *newskb;
372         unsigned int limit = priv->rx_ring_size;
373         u8 rssi, rate;
374
375         while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
376                 if (!limit--)
377                         break;
378
379                 status = le32_to_cpu(priv->rx_ring[entry].status);
380                 rate = (status & RDES0_STATUS_RXDR) >> 12;
381                 rssi = le32_to_cpu(priv->rx_ring[entry].length) &
382                         RDES1_STATUS_RSSI;
383
384                 pktlen = status & RDES0_STATUS_FL;
385                 if (pktlen > RX_PKT_SIZE) {
386                         if (net_ratelimit())
387                                 printk(KERN_DEBUG "%s: frame too long (%d)\n",
388                                        wiphy_name(dev->wiphy), pktlen);
389                         pktlen = RX_PKT_SIZE;
390                 }
391
392                 if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) {
393                         skb = NULL; /* old buffer will be reused */
394                         /* TODO: update RX error stats */
395                         /* TODO: check RDES0_STATUS_CRC*E */
396                 } else if (pktlen < RX_COPY_BREAK) {
397                         skb = dev_alloc_skb(pktlen);
398                         if (skb) {
399                                 pci_dma_sync_single_for_cpu(
400                                         priv->pdev,
401                                         priv->rx_buffers[entry].mapping,
402                                         pktlen, PCI_DMA_FROMDEVICE);
403                                 memcpy(skb_put(skb, pktlen),
404                                        skb_tail_pointer(priv->rx_buffers[entry].skb),
405                                        pktlen);
406                                 pci_dma_sync_single_for_device(
407                                         priv->pdev,
408                                         priv->rx_buffers[entry].mapping,
409                                         RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
410                         }
411                 } else {
412                         newskb = dev_alloc_skb(RX_PKT_SIZE);
413                         if (newskb) {
414                                 skb = priv->rx_buffers[entry].skb;
415                                 skb_put(skb, pktlen);
416                                 pci_unmap_single(
417                                         priv->pdev,
418                                         priv->rx_buffers[entry].mapping,
419                                         RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
420                                 priv->rx_buffers[entry].skb = newskb;
421                                 priv->rx_buffers[entry].mapping =
422                                         pci_map_single(priv->pdev,
423                                                        skb_tail_pointer(newskb),
424                                                        RX_PKT_SIZE,
425                                                        PCI_DMA_FROMDEVICE);
426                         } else {
427                                 skb = NULL;
428                                 /* TODO: update rx dropped stats */
429                         }
430
431                         priv->rx_ring[entry].buffer1 =
432                                 cpu_to_le32(priv->rx_buffers[entry].mapping);
433                 }
434
435                 priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN |
436                                                           RDES0_STATUS_SQL);
437                 priv->rx_ring[entry].length =
438                         cpu_to_le32(RX_PKT_SIZE |
439                                     (entry == priv->rx_ring_size - 1 ?
440                                      RDES1_CONTROL_RER : 0));
441
442                 if (skb) {
443                         struct ieee80211_rx_status rx_status = {0};
444
445                         if (priv->pdev->revision < ADM8211_REV_CA)
446                                 rx_status.signal = rssi;
447                         else
448                                 rx_status.signal = 100 - rssi;
449
450                         rx_status.rate_idx = rate;
451
452                         rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
453                         rx_status.band = IEEE80211_BAND_2GHZ;
454
455                         ieee80211_rx_irqsafe(dev, skb, &rx_status);
456                 }
457
458                 entry = (++priv->cur_rx) % priv->rx_ring_size;
459         }
460
461         /* TODO: check LPC and update stats? */
462 }
463
464
465 static irqreturn_t adm8211_interrupt(int irq, void *dev_id)
466 {
467 #define ADM8211_INT(x)                                                     \
468 do {                                                                       \
469         if (unlikely(stsr & ADM8211_STSR_ ## x))                           \
470                 printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \
471 } while (0)
472
473         struct ieee80211_hw *dev = dev_id;
474         struct adm8211_priv *priv = dev->priv;
475         u32 stsr = ADM8211_CSR_READ(STSR);
476         ADM8211_CSR_WRITE(STSR, stsr);
477         if (stsr == 0xffffffff)
478                 return IRQ_HANDLED;
479
480         if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS)))
481                 return IRQ_HANDLED;
482
483         if (stsr & ADM8211_STSR_RCI)
484                 adm8211_interrupt_rci(dev);
485         if (stsr & ADM8211_STSR_TCI)
486                 adm8211_interrupt_tci(dev);
487
488         ADM8211_INT(PCF);
489         ADM8211_INT(BCNTC);
490         ADM8211_INT(GPINT);
491         ADM8211_INT(ATIMTC);
492         ADM8211_INT(TSFTF);
493         ADM8211_INT(TSCZ);
494         ADM8211_INT(SQL);
495         ADM8211_INT(WEPTD);
496         ADM8211_INT(ATIME);
497         ADM8211_INT(TEIS);
498         ADM8211_INT(FBE);
499         ADM8211_INT(REIS);
500         ADM8211_INT(GPTT);
501         ADM8211_INT(RPS);
502         ADM8211_INT(RDU);
503         ADM8211_INT(TUF);
504         ADM8211_INT(TPS);
505
506         return IRQ_HANDLED;
507
508 #undef ADM8211_INT
509 }
510
511 #define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\
512 static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev,         \
513                                            u16 addr, u32 value) {            \
514         struct adm8211_priv *priv = dev->priv;                               \
515         unsigned int i;                                                      \
516         u32 reg, bitbuf;                                                     \
517                                                                              \
518         value &= v_mask;                                                     \
519         addr &= a_mask;                                                      \
520         bitbuf = (value << v_shift) | (addr << a_shift);                     \
521                                                                              \
522         ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1);                 \
523         ADM8211_CSR_READ(SYNRF);                                             \
524         ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0);                 \
525         ADM8211_CSR_READ(SYNRF);                                             \
526                                                                              \
527         if (prewrite) {                                                      \
528                 ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0);     \
529                 ADM8211_CSR_READ(SYNRF);                                     \
530         }                                                                    \
531                                                                              \
532         for (i = 0; i <= bits; i++) {                                        \
533                 if (bitbuf & (1 << (bits - i)))                              \
534                         reg = ADM8211_SYNRF_WRITE_SYNDATA_1;                 \
535                 else                                                         \
536                         reg = ADM8211_SYNRF_WRITE_SYNDATA_0;                 \
537                                                                              \
538                 ADM8211_CSR_WRITE(SYNRF, reg);                               \
539                 ADM8211_CSR_READ(SYNRF);                                     \
540                                                                              \
541                 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \
542                 ADM8211_CSR_READ(SYNRF);                                     \
543                 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \
544                 ADM8211_CSR_READ(SYNRF);                                     \
545         }                                                                    \
546                                                                              \
547         if (postwrite == 1) {                                                \
548                 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0);   \
549                 ADM8211_CSR_READ(SYNRF);                                     \
550         }                                                                    \
551         if (postwrite == 2) {                                                \
552                 ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1);   \
553                 ADM8211_CSR_READ(SYNRF);                                     \
554         }                                                                    \
555                                                                              \
556         ADM8211_CSR_WRITE(SYNRF, 0);                                         \
557         ADM8211_CSR_READ(SYNRF);                                             \
558 }
559
560 WRITE_SYN(max2820,  0x00FFF, 0, 0x0F, 12, 15, 1, 1)
561 WRITE_SYN(al2210l,  0xFFFFF, 4, 0x0F,  0, 23, 1, 1)
562 WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1)
563 WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F,  0, 21, 0, 2)
564
565 #undef WRITE_SYN
566
567 static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data)
568 {
569         struct adm8211_priv *priv = dev->priv;
570         unsigned int timeout;
571         u32 reg;
572
573         timeout = 10;
574         while (timeout > 0) {
575                 reg = ADM8211_CSR_READ(BBPCTL);
576                 if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD)))
577                         break;
578                 timeout--;
579                 msleep(2);
580         }
581
582         if (timeout == 0) {
583                 printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
584                        " prewrite (reg=0x%08x)\n",
585                        wiphy_name(dev->wiphy), addr, data, reg);
586                 return -ETIMEDOUT;
587         }
588
589         switch (priv->bbp_type) {
590         case ADM8211_TYPE_INTERSIL:
591                 reg = ADM8211_BBPCTL_MMISEL;    /* three wire interface */
592                 break;
593         case ADM8211_TYPE_RFMD:
594                 reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
595                       (0x01 << 18);
596                 break;
597         case ADM8211_TYPE_ADMTEK:
598                 reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP |
599                       (0x05 << 18);
600                 break;
601         }
602         reg |= ADM8211_BBPCTL_WR | (addr << 8) | data;
603
604         ADM8211_CSR_WRITE(BBPCTL, reg);
605
606         timeout = 10;
607         while (timeout > 0) {
608                 reg = ADM8211_CSR_READ(BBPCTL);
609                 if (!(reg & ADM8211_BBPCTL_WR))
610                         break;
611                 timeout--;
612                 msleep(2);
613         }
614
615         if (timeout == 0) {
616                 ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) &
617                                   ~ADM8211_BBPCTL_WR);
618                 printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
619                        " postwrite (reg=0x%08x)\n",
620                        wiphy_name(dev->wiphy), addr, data, reg);
621                 return -ETIMEDOUT;
622         }
623
624         return 0;
625 }
626
627 static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)
628 {
629         static const u32 adm8211_rfmd2958_reg5[] =
630                 {0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340,
631                  0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7};
632         static const u32 adm8211_rfmd2958_reg6[] =
633                 {0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000,
634                  0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745};
635
636         struct adm8211_priv *priv = dev->priv;
637         u8 ant_power = priv->ant_power > 0x3F ?
638                 priv->eeprom->antenna_power[chan - 1] : priv->ant_power;
639         u8 tx_power = priv->tx_power > 0x3F ?
640                 priv->eeprom->tx_power[chan - 1] : priv->tx_power;
641         u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ?
642                 priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff;
643         u8 lnags_thresh = priv->lnags_threshold == 0xFF ?
644                 priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold;
645         u32 reg;
646
647         ADM8211_IDLE();
648
649         /* Program synthesizer to new channel */
650         switch (priv->transceiver_type) {
651         case ADM8211_RFMD2958:
652         case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
653                 adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007);
654                 adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033);
655
656                 adm8211_rf_write_syn_rfmd2958(dev, 0x05,
657                         adm8211_rfmd2958_reg5[chan - 1]);
658                 adm8211_rf_write_syn_rfmd2958(dev, 0x06,
659                         adm8211_rfmd2958_reg6[chan - 1]);
660                 break;
661
662         case ADM8211_RFMD2948:
663                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF,
664                                               SI4126_MAIN_XINDIV2);
665                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN,
666                                               SI4126_POWERDOWN_PDIB |
667                                               SI4126_POWERDOWN_PDRB);
668                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0);
669                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV,
670                                               (chan == 14 ?
671                                                2110 : (2033 + (chan * 5))));
672                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496);
673                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44);
674                 adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44);
675                 break;
676
677         case ADM8211_MAX2820:
678                 adm8211_rf_write_syn_max2820(dev, 0x3,
679                         (chan == 14 ? 0x054 : (0x7 + (chan * 5))));
680                 break;
681
682         case ADM8211_AL2210L:
683                 adm8211_rf_write_syn_al2210l(dev, 0x0,
684                         (chan == 14 ? 0x229B4 : (0x22967 + (chan * 5))));
685                 break;
686
687         default:
688                 printk(KERN_DEBUG "%s: unsupported transceiver type %d\n",
689                        wiphy_name(dev->wiphy), priv->transceiver_type);
690                 break;
691         }
692
693         /* write BBP regs */
694         if (priv->bbp_type == ADM8211_TYPE_RFMD) {
695
696         /* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */
697         /* TODO: remove if SMC 2635W doesn't need this */
698         if (priv->transceiver_type == ADM8211_RFMD2948) {
699                 reg = ADM8211_CSR_READ(GPIO);
700                 reg &= 0xfffc0000;
701                 reg |= ADM8211_CSR_GPIO_EN0;
702                 if (chan != 14)
703                         reg |= ADM8211_CSR_GPIO_O0;
704                 ADM8211_CSR_WRITE(GPIO, reg);
705         }
706
707         if (priv->transceiver_type == ADM8211_RFMD2958) {
708                 /* set PCNT2 */
709                 adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100);
710                 /* set PCNT1 P_DESIRED/MID_BIAS */
711                 reg = le16_to_cpu(priv->eeprom->cr49);
712                 reg >>= 13;
713                 reg <<= 15;
714                 reg |= ant_power << 9;
715                 adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg);
716                 /* set TXRX TX_GAIN */
717                 adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 |
718                         (priv->pdev->revision < ADM8211_REV_CA ? tx_power : 0));
719         } else {
720                 reg = ADM8211_CSR_READ(PLCPHD);
721                 reg &= 0xff00ffff;
722                 reg |= tx_power << 18;
723                 ADM8211_CSR_WRITE(PLCPHD, reg);
724         }
725
726         ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
727                           ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
728         ADM8211_CSR_READ(SYNRF);
729         msleep(30);
730
731         /* RF3000 BBP */
732         if (priv->transceiver_type != ADM8211_RFMD2958)
733                 adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT,
734                                   tx_power<<2);
735         adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff);
736         adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh);
737         adm8211_write_bbp(dev, 0x1c, priv->pdev->revision == ADM8211_REV_BA ?
738                                      priv->eeprom->cr28 : 0);
739         adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
740
741         ADM8211_CSR_WRITE(SYNRF, 0);
742
743         /* Nothing to do for ADMtek BBP */
744         } else if (priv->bbp_type != ADM8211_TYPE_ADMTEK)
745                 printk(KERN_DEBUG "%s: unsupported BBP type %d\n",
746                        wiphy_name(dev->wiphy), priv->bbp_type);
747
748         ADM8211_RESTORE();
749
750         /* update current channel for adhoc (and maybe AP mode) */
751         reg = ADM8211_CSR_READ(CAP0);
752         reg &= ~0xF;
753         reg |= chan;
754         ADM8211_CSR_WRITE(CAP0, reg);
755
756         return 0;
757 }
758
759 static void adm8211_update_mode(struct ieee80211_hw *dev)
760 {
761         struct adm8211_priv *priv = dev->priv;
762
763         ADM8211_IDLE();
764
765         priv->soft_rx_crc = 0;
766         switch (priv->mode) {
767         case NL80211_IFTYPE_STATION:
768                 priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA);
769                 priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR;
770                 break;
771         case NL80211_IFTYPE_ADHOC:
772                 priv->nar &= ~ADM8211_NAR_PR;
773                 priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR;
774
775                 /* don't trust the error bits on rev 0x20 and up in adhoc */
776                 if (priv->pdev->revision >= ADM8211_REV_BA)
777                         priv->soft_rx_crc = 1;
778                 break;
779         case NL80211_IFTYPE_MONITOR:
780                 priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST);
781                 priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR;
782                 break;
783         }
784
785         ADM8211_RESTORE();
786 }
787
788 static void adm8211_hw_init_syn(struct ieee80211_hw *dev)
789 {
790         struct adm8211_priv *priv = dev->priv;
791
792         switch (priv->transceiver_type) {
793         case ADM8211_RFMD2958:
794         case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
795                 /* comments taken from ADMtek vendor driver */
796
797                 /* Reset RF2958 after power on */
798                 adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000);
799                 /* Initialize RF VCO Core Bias to maximum */
800                 adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F);
801                 /* Initialize IF PLL */
802                 adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03);
803                 /* Initialize IF PLL Coarse Tuning */
804                 adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F);
805                 /* Initialize RF PLL */
806                 adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403);
807                 /* Initialize RF PLL Coarse Tuning */
808                 adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F);
809                 /* Initialize TX gain and filter BW (R9) */
810                 adm8211_rf_write_syn_rfmd2958(dev, 0x09,
811                         (priv->transceiver_type == ADM8211_RFMD2958 ?
812                          0x10050 : 0x00050));
813                 /* Initialize CAL register */
814                 adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8);
815                 break;
816
817         case ADM8211_MAX2820:
818                 adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E);
819                 adm8211_rf_write_syn_max2820(dev, 0x2, 0x001);
820                 adm8211_rf_write_syn_max2820(dev, 0x3, 0x054);
821                 adm8211_rf_write_syn_max2820(dev, 0x4, 0x310);
822                 adm8211_rf_write_syn_max2820(dev, 0x5, 0x000);
823                 break;
824
825         case ADM8211_AL2210L:
826                 adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C);
827                 adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB);
828                 adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F);
829                 adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9);
830                 adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280);
831                 adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641);
832                 adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130);
833                 adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000);
834                 adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F);
835                 adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C);
836                 adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000);
837                 adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000);
838                 break;
839
840         case ADM8211_RFMD2948:
841         default:
842                 break;
843         }
844 }
845
846 static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)
847 {
848         struct adm8211_priv *priv = dev->priv;
849         u32 reg;
850
851         /* write addresses */
852         if (priv->bbp_type == ADM8211_TYPE_INTERSIL) {
853                 ADM8211_CSR_WRITE(MMIWA,  0x100E0C0A);
854                 ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E);
855                 ADM8211_CSR_WRITE(MMIRD1, 0x00100000);
856         } else if (priv->bbp_type == ADM8211_TYPE_RFMD ||
857                    priv->bbp_type == ADM8211_TYPE_ADMTEK) {
858                 /* check specific BBP type */
859                 switch (priv->specific_bbptype) {
860                 case ADM8211_BBP_RFMD3000:
861                 case ADM8211_BBP_RFMD3002:
862                         ADM8211_CSR_WRITE(MMIWA,  0x00009101);
863                         ADM8211_CSR_WRITE(MMIRD0, 0x00000301);
864                         break;
865
866                 case ADM8211_BBP_ADM8011:
867                         ADM8211_CSR_WRITE(MMIWA,  0x00008903);
868                         ADM8211_CSR_WRITE(MMIRD0, 0x00001716);
869
870                         reg = ADM8211_CSR_READ(BBPCTL);
871                         reg &= ~ADM8211_BBPCTL_TYPE;
872                         reg |= 0x5 << 18;
873                         ADM8211_CSR_WRITE(BBPCTL, reg);
874                         break;
875                 }
876
877                 switch (priv->pdev->revision) {
878                 case ADM8211_REV_CA:
879                         if (priv->transceiver_type == ADM8211_RFMD2958 ||
880                             priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
881                             priv->transceiver_type == ADM8211_RFMD2948)
882                                 ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22);
883                         else if (priv->transceiver_type == ADM8211_MAX2820 ||
884                                  priv->transceiver_type == ADM8211_AL2210L)
885                                 ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22);
886                         break;
887
888                 case ADM8211_REV_BA:
889                         reg  = ADM8211_CSR_READ(MMIRD1);
890                         reg &= 0x0000FFFF;
891                         reg |= 0x7e100000;
892                         ADM8211_CSR_WRITE(MMIRD1, reg);
893                         break;
894
895                 case ADM8211_REV_AB:
896                 case ADM8211_REV_AF:
897                 default:
898                         ADM8211_CSR_WRITE(MMIRD1, 0x7e100000);
899                         break;
900                 }
901
902                 /* For RFMD */
903                 ADM8211_CSR_WRITE(MACTEST, 0x800);
904         }
905
906         adm8211_hw_init_syn(dev);
907
908         /* Set RF Power control IF pin to PE1+PHYRST# */
909         ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF |
910                           ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST);
911         ADM8211_CSR_READ(SYNRF);
912         msleep(20);
913
914         /* write BBP regs */
915         if (priv->bbp_type == ADM8211_TYPE_RFMD) {
916                 /* RF3000 BBP */
917                 /* another set:
918                  * 11: c8
919                  * 14: 14
920                  * 15: 50 (chan 1..13; chan 14: d0)
921                  * 1c: 00
922                  * 1d: 84
923                  */
924                 adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80);
925                 /* antenna selection: diversity */
926                 adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80);
927                 adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74);
928                 adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38);
929                 adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40);
930
931                 if (priv->eeprom->major_version < 2) {
932                         adm8211_write_bbp(dev, 0x1c, 0x00);
933                         adm8211_write_bbp(dev, 0x1d, 0x80);
934                 } else {
935                         if (priv->pdev->revision == ADM8211_REV_BA)
936                                 adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28);
937                         else
938                                 adm8211_write_bbp(dev, 0x1c, 0x00);
939
940                         adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29);
941                 }
942         } else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) {
943                 /* reset baseband */
944                 adm8211_write_bbp(dev, 0x00, 0xFF);
945                 /* antenna selection: diversity */
946                 adm8211_write_bbp(dev, 0x07, 0x0A);
947
948                 /* TODO: find documentation for this */
949                 switch (priv->transceiver_type) {
950                 case ADM8211_RFMD2958:
951                 case ADM8211_RFMD2958_RF3000_CONTROL_POWER:
952                         adm8211_write_bbp(dev, 0x00, 0x00);
953                         adm8211_write_bbp(dev, 0x01, 0x00);
954                         adm8211_write_bbp(dev, 0x02, 0x00);
955                         adm8211_write_bbp(dev, 0x03, 0x00);
956                         adm8211_write_bbp(dev, 0x06, 0x0f);
957                         adm8211_write_bbp(dev, 0x09, 0x00);
958                         adm8211_write_bbp(dev, 0x0a, 0x00);
959                         adm8211_write_bbp(dev, 0x0b, 0x00);
960                         adm8211_write_bbp(dev, 0x0c, 0x00);
961                         adm8211_write_bbp(dev, 0x0f, 0xAA);
962                         adm8211_write_bbp(dev, 0x10, 0x8c);
963                         adm8211_write_bbp(dev, 0x11, 0x43);
964                         adm8211_write_bbp(dev, 0x18, 0x40);
965                         adm8211_write_bbp(dev, 0x20, 0x23);
966                         adm8211_write_bbp(dev, 0x21, 0x02);
967                         adm8211_write_bbp(dev, 0x22, 0x28);
968                         adm8211_write_bbp(dev, 0x23, 0x30);
969                         adm8211_write_bbp(dev, 0x24, 0x2d);
970                         adm8211_write_bbp(dev, 0x28, 0x35);
971                         adm8211_write_bbp(dev, 0x2a, 0x8c);
972                         adm8211_write_bbp(dev, 0x2b, 0x81);
973                         adm8211_write_bbp(dev, 0x2c, 0x44);
974                         adm8211_write_bbp(dev, 0x2d, 0x0A);
975                         adm8211_write_bbp(dev, 0x29, 0x40);
976                         adm8211_write_bbp(dev, 0x60, 0x08);
977                         adm8211_write_bbp(dev, 0x64, 0x01);
978                         break;
979
980                 case ADM8211_MAX2820:
981                         adm8211_write_bbp(dev, 0x00, 0x00);
982                         adm8211_write_bbp(dev, 0x01, 0x00);
983                         adm8211_write_bbp(dev, 0x02, 0x00);
984                         adm8211_write_bbp(dev, 0x03, 0x00);
985                         adm8211_write_bbp(dev, 0x06, 0x0f);
986                         adm8211_write_bbp(dev, 0x09, 0x05);
987                         adm8211_write_bbp(dev, 0x0a, 0x02);
988                         adm8211_write_bbp(dev, 0x0b, 0x00);
989                         adm8211_write_bbp(dev, 0x0c, 0x0f);
990                         adm8211_write_bbp(dev, 0x0f, 0x55);
991                         adm8211_write_bbp(dev, 0x10, 0x8d);
992                         adm8211_write_bbp(dev, 0x11, 0x43);
993                         adm8211_write_bbp(dev, 0x18, 0x4a);
994                         adm8211_write_bbp(dev, 0x20, 0x20);
995                         adm8211_write_bbp(dev, 0x21, 0x02);
996                         adm8211_write_bbp(dev, 0x22, 0x23);
997                         adm8211_write_bbp(dev, 0x23, 0x30);
998                         adm8211_write_bbp(dev, 0x24, 0x2d);
999                         adm8211_write_bbp(dev, 0x2a, 0x8c);
1000                         adm8211_write_bbp(dev, 0x2b, 0x81);
1001                         adm8211_write_bbp(dev, 0x2c, 0x44);
1002                         adm8211_write_bbp(dev, 0x29, 0x4a);
1003                         adm8211_write_bbp(dev, 0x60, 0x2b);
1004                         adm8211_write_bbp(dev, 0x64, 0x01);
1005                         break;
1006
1007                 case ADM8211_AL2210L:
1008                         adm8211_write_bbp(dev, 0x00, 0x00);
1009                         adm8211_write_bbp(dev, 0x01, 0x00);
1010                         adm8211_write_bbp(dev, 0x02, 0x00);
1011                         adm8211_write_bbp(dev, 0x03, 0x00);
1012                         adm8211_write_bbp(dev, 0x06, 0x0f);
1013                         adm8211_write_bbp(dev, 0x07, 0x05);
1014                         adm8211_write_bbp(dev, 0x08, 0x03);
1015                         adm8211_write_bbp(dev, 0x09, 0x00);
1016                         adm8211_write_bbp(dev, 0x0a, 0x00);
1017                         adm8211_write_bbp(dev, 0x0b, 0x00);
1018                         adm8211_write_bbp(dev, 0x0c, 0x10);
1019                         adm8211_write_bbp(dev, 0x0f, 0x55);
1020                         adm8211_write_bbp(dev, 0x10, 0x8d);
1021                         adm8211_write_bbp(dev, 0x11, 0x43);
1022                         adm8211_write_bbp(dev, 0x18, 0x4a);
1023                         adm8211_write_bbp(dev, 0x20, 0x20);
1024                         adm8211_write_bbp(dev, 0x21, 0x02);
1025                         adm8211_write_bbp(dev, 0x22, 0x23);
1026                         adm8211_write_bbp(dev, 0x23, 0x30);
1027                         adm8211_write_bbp(dev, 0x24, 0x2d);
1028                         adm8211_write_bbp(dev, 0x2a, 0xaa);
1029                         adm8211_write_bbp(dev, 0x2b, 0x81);
1030                         adm8211_write_bbp(dev, 0x2c, 0x44);
1031                         adm8211_write_bbp(dev, 0x29, 0xfa);
1032                         adm8211_write_bbp(dev, 0x60, 0x2d);
1033                         adm8211_write_bbp(dev, 0x64, 0x01);
1034                         break;
1035
1036                 case ADM8211_RFMD2948:
1037                         break;
1038
1039                 default:
1040                         printk(KERN_DEBUG "%s: unsupported transceiver %d\n",
1041                                wiphy_name(dev->wiphy), priv->transceiver_type);
1042                         break;
1043                 }
1044         } else
1045                 printk(KERN_DEBUG "%s: unsupported BBP %d\n",
1046                        wiphy_name(dev->wiphy), priv->bbp_type);
1047
1048         ADM8211_CSR_WRITE(SYNRF, 0);
1049
1050         /* Set RF CAL control source to MAC control */
1051         reg = ADM8211_CSR_READ(SYNCTL);
1052         reg |= ADM8211_SYNCTL_SELCAL;
1053         ADM8211_CSR_WRITE(SYNCTL, reg);
1054
1055         return 0;
1056 }
1057
1058 /* configures hw beacons/probe responses */
1059 static int adm8211_set_rate(struct ieee80211_hw *dev)
1060 {
1061         struct adm8211_priv *priv = dev->priv;
1062         u32 reg;
1063         int i = 0;
1064         u8 rate_buf[12] = {0};
1065
1066         /* write supported rates */
1067         if (priv->pdev->revision != ADM8211_REV_BA) {
1068                 rate_buf[0] = ARRAY_SIZE(adm8211_rates);
1069                 for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
1070                         rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
1071         } else {
1072                 /* workaround for rev BA specific bug */
1073                 rate_buf[0] = 0x04;
1074                 rate_buf[1] = 0x82;
1075                 rate_buf[2] = 0x04;
1076                 rate_buf[3] = 0x0b;
1077                 rate_buf[4] = 0x16;
1078         }
1079
1080         adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf,
1081                                  ARRAY_SIZE(adm8211_rates) + 1);
1082
1083         reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */
1084         reg |= 1 << 15; /* short preamble */
1085         reg |= 110 << 24;
1086         ADM8211_CSR_WRITE(PLCPHD, reg);
1087
1088         /* MTMLT   = 512 TU (max TX MSDU lifetime)
1089          * BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate)
1090          * SRTYLIM = 224 (short retry limit, TX header value is default) */
1091         ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0));
1092
1093         return 0;
1094 }
1095
1096 static void adm8211_hw_init(struct ieee80211_hw *dev)
1097 {
1098         struct adm8211_priv *priv = dev->priv;
1099         u32 reg;
1100         u8 cline;
1101
1102         reg = ADM8211_CSR_READ(PAR);
1103         reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME;
1104         reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL);
1105
1106         if (!pci_set_mwi(priv->pdev)) {
1107                 reg |= 0x1 << 24;
1108                 pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline);
1109
1110                 switch (cline) {
1111                 case  0x8: reg |= (0x1 << 14);
1112                            break;
1113                 case 0x16: reg |= (0x2 << 14);
1114                            break;
1115                 case 0x32: reg |= (0x3 << 14);
1116                            break;
1117                   default: reg |= (0x0 << 14);
1118                            break;
1119                 }
1120         }
1121
1122         ADM8211_CSR_WRITE(PAR, reg);
1123
1124         reg = ADM8211_CSR_READ(CSR_TEST1);
1125         reg &= ~(0xF << 28);
1126         reg |= (1 << 28) | (1 << 31);
1127         ADM8211_CSR_WRITE(CSR_TEST1, reg);
1128
1129         /* lose link after 4 lost beacons */
1130         reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE;
1131         ADM8211_CSR_WRITE(WCSR, reg);
1132
1133         /* Disable APM, enable receive FIFO threshold, and set drain receive
1134          * threshold to store-and-forward */
1135         reg = ADM8211_CSR_READ(CMDR);
1136         reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT);
1137         reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF;
1138         ADM8211_CSR_WRITE(CMDR, reg);
1139
1140         adm8211_set_rate(dev);
1141
1142         /* 4-bit values:
1143          * PWR1UP   = 8 * 2 ms
1144          * PWR0PAPE = 8 us or 5 us
1145          * PWR1PAPE = 1 us or 3 us
1146          * PWR0TRSW = 5 us
1147          * PWR1TRSW = 12 us
1148          * PWR0PE2  = 13 us
1149          * PWR1PE2  = 1 us
1150          * PWR0TXPE = 8 or 6 */
1151         if (priv->pdev->revision < ADM8211_REV_CA)
1152                 ADM8211_CSR_WRITE(TOFS2, 0x8815cd18);
1153         else
1154                 ADM8211_CSR_WRITE(TOFS2, 0x8535cd16);
1155
1156         /* Enable store and forward for transmit */
1157         priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB;
1158         ADM8211_CSR_WRITE(NAR, priv->nar);
1159
1160         /* Reset RF */
1161         ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO);
1162         ADM8211_CSR_READ(SYNRF);
1163         msleep(10);
1164         ADM8211_CSR_WRITE(SYNRF, 0);
1165         ADM8211_CSR_READ(SYNRF);
1166         msleep(5);
1167
1168         /* Set CFP Max Duration to 0x10 TU */
1169         reg = ADM8211_CSR_READ(CFPP);
1170         reg &= ~(0xffff << 8);
1171         reg |= 0x0010 << 8;
1172         ADM8211_CSR_WRITE(CFPP, reg);
1173
1174         /* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us
1175          * TUCNT = 0x3ff - Tu counter 1024 us  */
1176         ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff);
1177
1178         /* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us),
1179          * DIFS=50 us, EIFS=100 us */
1180         if (priv->pdev->revision < ADM8211_REV_CA)
1181                 ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) |
1182                                         (50 << 9)  | 100);
1183         else
1184                 ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) |
1185                                         (50 << 9)  | 100);
1186
1187         /* PCNT = 1 (MAC idle time awake/sleep, unit S)
1188          * RMRD = 2346 * 8 + 1 us (max RX duration)  */
1189         ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769);
1190
1191         /* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */
1192         ADM8211_CSR_WRITE(RSPT, 0xffffff00);
1193
1194         /* Initialize BBP (and SYN) */
1195         adm8211_hw_init_bbp(dev);
1196
1197         /* make sure interrupts are off */
1198         ADM8211_CSR_WRITE(IER, 0);
1199
1200         /* ACK interrupts */
1201         ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR));
1202
1203         /* Setup WEP (turns it off for now) */
1204         reg = ADM8211_CSR_READ(MACTEST);
1205         reg &= ~(7 << 20);
1206         ADM8211_CSR_WRITE(MACTEST, reg);
1207
1208         reg = ADM8211_CSR_READ(WEPCTL);
1209         reg &= ~ADM8211_WEPCTL_WEPENABLE;
1210         reg |= ADM8211_WEPCTL_WEPRXBYP;
1211         ADM8211_CSR_WRITE(WEPCTL, reg);
1212
1213         /* Clear the missed-packet counter. */
1214         ADM8211_CSR_READ(LPC);
1215 }
1216
1217 static int adm8211_hw_reset(struct ieee80211_hw *dev)
1218 {
1219         struct adm8211_priv *priv = dev->priv;
1220         u32 reg, tmp;
1221         int timeout = 100;
1222
1223         /* Power-on issue */
1224         /* TODO: check if this is necessary */
1225         ADM8211_CSR_WRITE(FRCTL, 0);
1226
1227         /* Reset the chip */
1228         tmp = ADM8211_CSR_READ(PAR);
1229         ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR);
1230
1231         while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--)
1232                 msleep(50);
1233
1234         if (timeout <= 0)
1235                 return -ETIMEDOUT;
1236
1237         ADM8211_CSR_WRITE(PAR, tmp);
1238
1239         if (priv->pdev->revision == ADM8211_REV_BA &&
1240             (priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER ||
1241              priv->transceiver_type == ADM8211_RFMD2958)) {
1242                 reg = ADM8211_CSR_READ(CSR_TEST1);
1243                 reg |= (1 << 4) | (1 << 5);
1244                 ADM8211_CSR_WRITE(CSR_TEST1, reg);
1245         } else if (priv->pdev->revision == ADM8211_REV_CA) {
1246                 reg = ADM8211_CSR_READ(CSR_TEST1);
1247                 reg &= ~((1 << 4) | (1 << 5));
1248                 ADM8211_CSR_WRITE(CSR_TEST1, reg);
1249         }
1250
1251         ADM8211_CSR_WRITE(FRCTL, 0);
1252
1253         reg = ADM8211_CSR_READ(CSR_TEST0);
1254         reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */
1255         ADM8211_CSR_WRITE(CSR_TEST0, reg);
1256
1257         adm8211_clear_sram(dev);
1258
1259         return 0;
1260 }
1261
1262 static u64 adm8211_get_tsft(struct ieee80211_hw *dev)
1263 {
1264         struct adm8211_priv *priv = dev->priv;
1265         u32 tsftl;
1266         u64 tsft;
1267
1268         tsftl = ADM8211_CSR_READ(TSFTL);
1269         tsft = ADM8211_CSR_READ(TSFTH);
1270         tsft <<= 32;
1271         tsft |= tsftl;
1272
1273         return tsft;
1274 }
1275
1276 static void adm8211_set_interval(struct ieee80211_hw *dev,
1277                                  unsigned short bi, unsigned short li)
1278 {
1279         struct adm8211_priv *priv = dev->priv;
1280         u32 reg;
1281
1282         /* BP (beacon interval) = data->beacon_interval
1283          * LI (listen interval) = data->listen_interval (in beacon intervals) */
1284         reg = (bi << 16) | li;
1285         ADM8211_CSR_WRITE(BPLI, reg);
1286 }
1287
1288 static void adm8211_set_bssid(struct ieee80211_hw *dev, const u8 *bssid)
1289 {
1290         struct adm8211_priv *priv = dev->priv;
1291         u32 reg;
1292
1293         ADM8211_CSR_WRITE(BSSID0, le32_to_cpu(*(__le32 *)bssid));
1294         reg = ADM8211_CSR_READ(ABDA1);
1295         reg &= 0x0000ffff;
1296         reg |= (bssid[4] << 16) | (bssid[5] << 24);
1297         ADM8211_CSR_WRITE(ABDA1, reg);
1298 }
1299
1300 static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
1301 {
1302         struct adm8211_priv *priv = dev->priv;
1303         struct ieee80211_conf *conf = &dev->conf;
1304         int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
1305
1306         if (channel != priv->channel) {
1307                 priv->channel = channel;
1308                 adm8211_rf_set_channel(dev, priv->channel);
1309         }
1310
1311         return 0;
1312 }
1313
1314 static int adm8211_config_interface(struct ieee80211_hw *dev,
1315                                     struct ieee80211_vif *vif,
1316                                     struct ieee80211_if_conf *conf)
1317 {
1318         struct adm8211_priv *priv = dev->priv;
1319
1320         if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
1321                 adm8211_set_bssid(dev, conf->bssid);
1322                 memcpy(priv->bssid, conf->bssid, ETH_ALEN);
1323         }
1324
1325         return 0;
1326 }
1327
1328 static void adm8211_configure_filter(struct ieee80211_hw *dev,
1329                                      unsigned int changed_flags,
1330                                      unsigned int *total_flags,
1331                                      int mc_count, struct dev_mc_list *mclist)
1332 {
1333         static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
1334         struct adm8211_priv *priv = dev->priv;
1335         unsigned int bit_nr, new_flags;
1336         u32 mc_filter[2];
1337         int i;
1338
1339         new_flags = 0;
1340
1341         if (*total_flags & FIF_PROMISC_IN_BSS) {
1342                 new_flags |= FIF_PROMISC_IN_BSS;
1343                 priv->nar |= ADM8211_NAR_PR;
1344                 priv->nar &= ~ADM8211_NAR_MM;
1345                 mc_filter[1] = mc_filter[0] = ~0;
1346         } else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
1347                 new_flags |= FIF_ALLMULTI;
1348                 priv->nar &= ~ADM8211_NAR_PR;
1349                 priv->nar |= ADM8211_NAR_MM;
1350                 mc_filter[1] = mc_filter[0] = ~0;
1351         } else {
1352                 priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);
1353                 mc_filter[1] = mc_filter[0] = 0;
1354                 for (i = 0; i < mc_count; i++) {
1355                         if (!mclist)
1356                                 break;
1357                         bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
1358
1359                         bit_nr &= 0x3F;
1360                         mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
1361                         mclist = mclist->next;
1362                 }
1363         }
1364
1365         ADM8211_IDLE_RX();
1366
1367         ADM8211_CSR_WRITE(MAR0, mc_filter[0]);
1368         ADM8211_CSR_WRITE(MAR1, mc_filter[1]);
1369         ADM8211_CSR_READ(NAR);
1370
1371         if (priv->nar & ADM8211_NAR_PR)
1372                 dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
1373         else
1374                 dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
1375
1376         if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
1377                 adm8211_set_bssid(dev, bcast);
1378         else
1379                 adm8211_set_bssid(dev, priv->bssid);
1380
1381         ADM8211_RESTORE();
1382
1383         *total_flags = new_flags;
1384 }
1385
1386 static int adm8211_add_interface(struct ieee80211_hw *dev,
1387                                  struct ieee80211_if_init_conf *conf)
1388 {
1389         struct adm8211_priv *priv = dev->priv;
1390         if (priv->mode != NL80211_IFTYPE_MONITOR)
1391                 return -EOPNOTSUPP;
1392
1393         switch (conf->type) {
1394         case NL80211_IFTYPE_STATION:
1395                 priv->mode = conf->type;
1396                 break;
1397         default:
1398                 return -EOPNOTSUPP;
1399         }
1400
1401         ADM8211_IDLE();
1402
1403         ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)conf->mac_addr));
1404         ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
1405
1406         adm8211_update_mode(dev);
1407
1408         ADM8211_RESTORE();
1409
1410         return 0;
1411 }
1412
1413 static void adm8211_remove_interface(struct ieee80211_hw *dev,
1414                                      struct ieee80211_if_init_conf *conf)
1415 {
1416         struct adm8211_priv *priv = dev->priv;
1417         priv->mode = NL80211_IFTYPE_MONITOR;
1418 }
1419
1420 static int adm8211_init_rings(struct ieee80211_hw *dev)
1421 {
1422         struct adm8211_priv *priv = dev->priv;
1423         struct adm8211_desc *desc = NULL;
1424         struct adm8211_rx_ring_info *rx_info;
1425         struct adm8211_tx_ring_info *tx_info;
1426         unsigned int i;
1427
1428         for (i = 0; i < priv->rx_ring_size; i++) {
1429                 desc = &priv->rx_ring[i];
1430                 desc->status = 0;
1431                 desc->length = cpu_to_le32(RX_PKT_SIZE);
1432                 priv->rx_buffers[i].skb = NULL;
1433         }
1434         /* Mark the end of RX ring; hw returns to base address after this
1435          * descriptor */
1436         desc->length |= cpu_to_le32(RDES1_CONTROL_RER);
1437
1438         for (i = 0; i < priv->rx_ring_size; i++) {
1439                 desc = &priv->rx_ring[i];
1440                 rx_info = &priv->rx_buffers[i];
1441
1442                 rx_info->skb = dev_alloc_skb(RX_PKT_SIZE);
1443                 if (rx_info->skb == NULL)
1444                         break;
1445                 rx_info->mapping = pci_map_single(priv->pdev,
1446                                                   skb_tail_pointer(rx_info->skb),
1447                                                   RX_PKT_SIZE,
1448                                                   PCI_DMA_FROMDEVICE);
1449                 desc->buffer1 = cpu_to_le32(rx_info->mapping);
1450                 desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL);
1451         }
1452
1453         /* Setup TX ring. TX buffers descriptors will be filled in as needed */
1454         for (i = 0; i < priv->tx_ring_size; i++) {
1455                 desc = &priv->tx_ring[i];
1456                 tx_info = &priv->tx_buffers[i];
1457
1458                 tx_info->skb = NULL;
1459                 tx_info->mapping = 0;
1460                 desc->status = 0;
1461         }
1462         desc->length = cpu_to_le32(TDES1_CONTROL_TER);
1463
1464         priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0;
1465         ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma);
1466         ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma);
1467
1468         return 0;
1469 }
1470
1471 static void adm8211_free_rings(struct ieee80211_hw *dev)
1472 {
1473         struct adm8211_priv *priv = dev->priv;
1474         unsigned int i;
1475
1476         for (i = 0; i < priv->rx_ring_size; i++) {
1477                 if (!priv->rx_buffers[i].skb)
1478                         continue;
1479
1480                 pci_unmap_single(
1481                         priv->pdev,
1482                         priv->rx_buffers[i].mapping,
1483                         RX_PKT_SIZE, PCI_DMA_FROMDEVICE);
1484
1485                 dev_kfree_skb(priv->rx_buffers[i].skb);
1486         }
1487
1488         for (i = 0; i < priv->tx_ring_size; i++) {
1489                 if (!priv->tx_buffers[i].skb)
1490                         continue;
1491
1492                 pci_unmap_single(priv->pdev,
1493                                  priv->tx_buffers[i].mapping,
1494                                  priv->tx_buffers[i].skb->len,
1495                                  PCI_DMA_TODEVICE);
1496
1497                 dev_kfree_skb(priv->tx_buffers[i].skb);
1498         }
1499 }
1500
1501 static int adm8211_start(struct ieee80211_hw *dev)
1502 {
1503         struct adm8211_priv *priv = dev->priv;
1504         int retval;
1505
1506         /* Power up MAC and RF chips */
1507         retval = adm8211_hw_reset(dev);
1508         if (retval) {
1509                 printk(KERN_ERR "%s: hardware reset failed\n",
1510                        wiphy_name(dev->wiphy));
1511                 goto fail;
1512         }
1513
1514         retval = adm8211_init_rings(dev);
1515         if (retval) {
1516                 printk(KERN_ERR "%s: failed to initialize rings\n",
1517                        wiphy_name(dev->wiphy));
1518                 goto fail;
1519         }
1520
1521         /* Init hardware */
1522         adm8211_hw_init(dev);
1523         adm8211_rf_set_channel(dev, priv->channel);
1524
1525         retval = request_irq(priv->pdev->irq, &adm8211_interrupt,
1526                              IRQF_SHARED, "adm8211", dev);
1527         if (retval) {
1528                 printk(KERN_ERR "%s: failed to register IRQ handler\n",
1529                        wiphy_name(dev->wiphy));
1530                 goto fail;
1531         }
1532
1533         ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE |
1534                                ADM8211_IER_RCIE | ADM8211_IER_TCIE |
1535                                ADM8211_IER_TDUIE | ADM8211_IER_GPTIE);
1536         priv->mode = NL80211_IFTYPE_MONITOR;
1537         adm8211_update_mode(dev);
1538         ADM8211_CSR_WRITE(RDR, 0);
1539
1540         adm8211_set_interval(dev, 100, 10);
1541         return 0;
1542
1543 fail:
1544         return retval;
1545 }
1546
1547 static void adm8211_stop(struct ieee80211_hw *dev)
1548 {
1549         struct adm8211_priv *priv = dev->priv;
1550
1551         priv->mode = NL80211_IFTYPE_UNSPECIFIED;
1552         priv->nar = 0;
1553         ADM8211_CSR_WRITE(NAR, 0);
1554         ADM8211_CSR_WRITE(IER, 0);
1555         ADM8211_CSR_READ(NAR);
1556
1557         free_irq(priv->pdev->irq, dev);
1558
1559         adm8211_free_rings(dev);
1560 }
1561
1562 static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len,
1563                                    int plcp_signal, int short_preamble)
1564 {
1565         /* Alternative calculation from NetBSD: */
1566
1567 /* IEEE 802.11b durations for DSSS PHY in microseconds */
1568 #define IEEE80211_DUR_DS_LONG_PREAMBLE  144
1569 #define IEEE80211_DUR_DS_SHORT_PREAMBLE 72
1570 #define IEEE80211_DUR_DS_FAST_PLCPHDR   24
1571 #define IEEE80211_DUR_DS_SLOW_PLCPHDR   48
1572 #define IEEE80211_DUR_DS_SLOW_ACK       112
1573 #define IEEE80211_DUR_DS_FAST_ACK       56
1574 #define IEEE80211_DUR_DS_SLOW_CTS       112
1575 #define IEEE80211_DUR_DS_FAST_CTS       56
1576 #define IEEE80211_DUR_DS_SLOT           20
1577 #define IEEE80211_DUR_DS_SIFS           10
1578
1579         int remainder;
1580
1581         *dur = (80 * (24 + payload_len) + plcp_signal - 1)
1582                 / plcp_signal;
1583
1584         if (plcp_signal <= PLCP_SIGNAL_2M)
1585                 /* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */
1586                 *dur += 3 * (IEEE80211_DUR_DS_SIFS +
1587                              IEEE80211_DUR_DS_SHORT_PREAMBLE +
1588                              IEEE80211_DUR_DS_FAST_PLCPHDR) +
1589                              IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK;
1590         else
1591                 /* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */
1592                 *dur += 3 * (IEEE80211_DUR_DS_SIFS +
1593                              IEEE80211_DUR_DS_SHORT_PREAMBLE +
1594                              IEEE80211_DUR_DS_FAST_PLCPHDR) +
1595                              IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK;
1596
1597         /* lengthen duration if long preamble */
1598         if (!short_preamble)
1599                 *dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE -
1600                              IEEE80211_DUR_DS_SHORT_PREAMBLE) +
1601                         3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR -
1602                              IEEE80211_DUR_DS_FAST_PLCPHDR);
1603
1604
1605         *plcp = (80 * len) / plcp_signal;
1606         remainder = (80 * len) % plcp_signal;
1607         if (plcp_signal == PLCP_SIGNAL_11M &&
1608             remainder <= 30 && remainder > 0)
1609                 *plcp = (*plcp | 0x8000) + 1;
1610         else if (remainder)
1611                 (*plcp)++;
1612 }
1613
1614 /* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */
1615 static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb,
1616                            u16 plcp_signal,
1617                            size_t hdrlen)
1618 {
1619         struct adm8211_priv *priv = dev->priv;
1620         unsigned long flags;
1621         dma_addr_t mapping;
1622         unsigned int entry;
1623         u32 flag;
1624
1625         mapping = pci_map_single(priv->pdev, skb->data, skb->len,
1626                                  PCI_DMA_TODEVICE);
1627
1628         spin_lock_irqsave(&priv->lock, flags);
1629
1630         if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2)
1631                 flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS;
1632         else
1633                 flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS;
1634
1635         if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2)
1636                 ieee80211_stop_queue(dev, 0);
1637
1638         entry = priv->cur_tx % priv->tx_ring_size;
1639
1640         priv->tx_buffers[entry].skb = skb;
1641         priv->tx_buffers[entry].mapping = mapping;
1642         priv->tx_buffers[entry].hdrlen = hdrlen;
1643         priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
1644
1645         if (entry == priv->tx_ring_size - 1)
1646                 flag |= TDES1_CONTROL_TER;
1647         priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len);
1648
1649         /* Set TX rate (SIGNAL field in PLCP PPDU format) */
1650         flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */;
1651         priv->tx_ring[entry].status = cpu_to_le32(flag);
1652
1653         priv->cur_tx++;
1654
1655         spin_unlock_irqrestore(&priv->lock, flags);
1656
1657         /* Trigger transmit poll */
1658         ADM8211_CSR_WRITE(TDR, 0);
1659 }
1660
1661 /* Put adm8211_tx_hdr on skb and transmit */
1662 static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
1663 {
1664         struct adm8211_tx_hdr *txhdr;
1665         size_t payload_len, hdrlen;
1666         int plcp, dur, len, plcp_signal, short_preamble;
1667         struct ieee80211_hdr *hdr;
1668         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1669         struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info);
1670         u8 rc_flags;
1671
1672         rc_flags = info->control.rates[0].flags;
1673         short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
1674         plcp_signal = txrate->bitrate;
1675
1676         hdr = (struct ieee80211_hdr *)skb->data;
1677         hdrlen = ieee80211_hdrlen(hdr->frame_control);
1678         memcpy(skb->cb, skb->data, hdrlen);
1679         hdr = (struct ieee80211_hdr *)skb->cb;
1680         skb_pull(skb, hdrlen);
1681         payload_len = skb->len;
1682
1683         txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr));
1684         memset(txhdr, 0, sizeof(*txhdr));
1685         memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN);
1686         txhdr->signal = plcp_signal;
1687         txhdr->frame_body_size = cpu_to_le16(payload_len);
1688         txhdr->frame_control = hdr->frame_control;
1689
1690         len = hdrlen + payload_len + FCS_LEN;
1691
1692         txhdr->frag = cpu_to_le16(0x0FFF);
1693         adm8211_calc_durations(&dur, &plcp, payload_len,
1694                                len, plcp_signal, short_preamble);
1695         txhdr->plcp_frag_head_len = cpu_to_le16(plcp);
1696         txhdr->plcp_frag_tail_len = cpu_to_le16(plcp);
1697         txhdr->dur_frag_head = cpu_to_le16(dur);
1698         txhdr->dur_frag_tail = cpu_to_le16(dur);
1699
1700         txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER);
1701
1702         if (short_preamble)
1703                 txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE);
1704
1705         if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
1706                 txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
1707
1708         txhdr->retry_limit = info->control.rates[0].count;
1709
1710         adm8211_tx_raw(dev, skb, plcp_signal, hdrlen);
1711
1712         return NETDEV_TX_OK;
1713 }
1714
1715 static int adm8211_alloc_rings(struct ieee80211_hw *dev)
1716 {
1717         struct adm8211_priv *priv = dev->priv;
1718         unsigned int ring_size;
1719
1720         priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size +
1721                                    sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL);
1722         if (!priv->rx_buffers)
1723                 return -ENOMEM;
1724
1725         priv->tx_buffers = (void *)priv->rx_buffers +
1726                            sizeof(*priv->rx_buffers) * priv->rx_ring_size;
1727
1728         /* Allocate TX/RX descriptors */
1729         ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size +
1730                     sizeof(struct adm8211_desc) * priv->tx_ring_size;
1731         priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size,
1732                                              &priv->rx_ring_dma);
1733
1734         if (!priv->rx_ring) {
1735                 kfree(priv->rx_buffers);
1736                 priv->rx_buffers = NULL;
1737                 priv->tx_buffers = NULL;
1738                 return -ENOMEM;
1739         }
1740
1741         priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring +
1742                                                 priv->rx_ring_size);
1743         priv->tx_ring_dma = priv->rx_ring_dma +
1744                             sizeof(struct adm8211_desc) * priv->rx_ring_size;
1745
1746         return 0;
1747 }
1748
1749 static const struct ieee80211_ops adm8211_ops = {
1750         .tx                     = adm8211_tx,
1751         .start                  = adm8211_start,
1752         .stop                   = adm8211_stop,
1753         .add_interface          = adm8211_add_interface,
1754         .remove_interface       = adm8211_remove_interface,
1755         .config                 = adm8211_config,
1756         .config_interface       = adm8211_config_interface,
1757         .configure_filter       = adm8211_configure_filter,
1758         .get_stats              = adm8211_get_stats,
1759         .get_tx_stats           = adm8211_get_tx_stats,
1760         .get_tsf                = adm8211_get_tsft
1761 };
1762
1763 static int __devinit adm8211_probe(struct pci_dev *pdev,
1764                                    const struct pci_device_id *id)
1765 {
1766         struct ieee80211_hw *dev;
1767         struct adm8211_priv *priv;
1768         unsigned long mem_addr, mem_len;
1769         unsigned int io_addr, io_len;
1770         int err;
1771         u32 reg;
1772         u8 perm_addr[ETH_ALEN];
1773
1774         err = pci_enable_device(pdev);
1775         if (err) {
1776                 printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n",
1777                        pci_name(pdev));
1778                 return err;
1779         }
1780
1781         io_addr = pci_resource_start(pdev, 0);
1782         io_len = pci_resource_len(pdev, 0);
1783         mem_addr = pci_resource_start(pdev, 1);
1784         mem_len = pci_resource_len(pdev, 1);
1785         if (io_len < 256 || mem_len < 1024) {
1786                 printk(KERN_ERR "%s (adm8211): Too short PCI resources\n",
1787                        pci_name(pdev));
1788                 goto err_disable_pdev;
1789         }
1790
1791
1792         /* check signature */
1793         pci_read_config_dword(pdev, 0x80 /* CR32 */, &reg);
1794         if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) {
1795                 printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n",
1796                        pci_name(pdev), reg);
1797                 goto err_disable_pdev;
1798         }
1799
1800         err = pci_request_regions(pdev, "adm8211");
1801         if (err) {
1802                 printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n",
1803                        pci_name(pdev));
1804                 return err; /* someone else grabbed it? don't disable it */
1805         }
1806
1807         if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
1808             pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
1809                 printk(KERN_ERR "%s (adm8211): No suitable DMA available\n",
1810                        pci_name(pdev));
1811                 goto err_free_reg;
1812         }
1813
1814         pci_set_master(pdev);
1815
1816         dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops);
1817         if (!dev) {
1818                 printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n",
1819                        pci_name(pdev));
1820                 err = -ENOMEM;
1821                 goto err_free_reg;
1822         }
1823         priv = dev->priv;
1824         priv->pdev = pdev;
1825
1826         spin_lock_init(&priv->lock);
1827
1828         SET_IEEE80211_DEV(dev, &pdev->dev);
1829
1830         pci_set_drvdata(pdev, dev);
1831
1832         priv->map = pci_iomap(pdev, 1, mem_len);
1833         if (!priv->map)
1834                 priv->map = pci_iomap(pdev, 0, io_len);
1835
1836         if (!priv->map) {
1837                 printk(KERN_ERR "%s (adm8211): Cannot map device memory\n",
1838                        pci_name(pdev));
1839                 goto err_free_dev;
1840         }
1841
1842         priv->rx_ring_size = rx_ring_size;
1843         priv->tx_ring_size = tx_ring_size;
1844
1845         if (adm8211_alloc_rings(dev)) {
1846                 printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n",
1847                        pci_name(pdev));
1848                 goto err_iounmap;
1849         }
1850
1851         *(__le32 *)perm_addr = cpu_to_le32(ADM8211_CSR_READ(PAR0));
1852         *(__le16 *)&perm_addr[4] =
1853                 cpu_to_le16(ADM8211_CSR_READ(PAR1) & 0xFFFF);
1854
1855         if (!is_valid_ether_addr(perm_addr)) {
1856                 printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n",
1857                        pci_name(pdev));
1858                 random_ether_addr(perm_addr);
1859         }
1860         SET_IEEE80211_PERM_ADDR(dev, perm_addr);
1861
1862         dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
1863         /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
1864         dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
1865         dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1866
1867         dev->channel_change_time = 1000;
1868         dev->max_signal = 100;    /* FIXME: find better value */
1869
1870         dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
1871
1872         priv->retry_limit = 3;
1873         priv->ant_power = 0x40;
1874         priv->tx_power = 0x40;
1875         priv->lpf_cutoff = 0xFF;
1876         priv->lnags_threshold = 0xFF;
1877         priv->mode = NL80211_IFTYPE_UNSPECIFIED;
1878
1879         /* Power-on issue. EEPROM won't read correctly without */
1880         if (pdev->revision >= ADM8211_REV_BA) {
1881                 ADM8211_CSR_WRITE(FRCTL, 0);
1882                 ADM8211_CSR_READ(FRCTL);
1883                 ADM8211_CSR_WRITE(FRCTL, 1);
1884                 ADM8211_CSR_READ(FRCTL);
1885                 msleep(100);
1886         }
1887
1888         err = adm8211_read_eeprom(dev);
1889         if (err) {
1890                 printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n",
1891                        pci_name(pdev));
1892                 goto err_free_desc;
1893         }
1894
1895         priv->channel = 1;
1896
1897         dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
1898
1899         err = ieee80211_register_hw(dev);
1900         if (err) {
1901                 printk(KERN_ERR "%s (adm8211): Cannot register device\n",
1902                        pci_name(pdev));
1903                 goto err_free_desc;
1904         }
1905
1906         printk(KERN_INFO "%s: hwaddr %pM, Rev 0x%02x\n",
1907                wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
1908                pdev->revision);
1909
1910         return 0;
1911
1912  err_free_desc:
1913         pci_free_consistent(pdev,
1914                             sizeof(struct adm8211_desc) * priv->rx_ring_size +
1915                             sizeof(struct adm8211_desc) * priv->tx_ring_size,
1916                             priv->rx_ring, priv->rx_ring_dma);
1917         kfree(priv->rx_buffers);
1918
1919  err_iounmap:
1920         pci_iounmap(pdev, priv->map);
1921
1922  err_free_dev:
1923         pci_set_drvdata(pdev, NULL);
1924         ieee80211_free_hw(dev);
1925
1926  err_free_reg:
1927         pci_release_regions(pdev);
1928
1929  err_disable_pdev:
1930         pci_disable_device(pdev);
1931         return err;
1932 }
1933
1934
1935 static void __devexit adm8211_remove(struct pci_dev *pdev)
1936 {
1937         struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1938         struct adm8211_priv *priv;
1939
1940         if (!dev)
1941                 return;
1942
1943         ieee80211_unregister_hw(dev);
1944
1945         priv = dev->priv;
1946
1947         pci_free_consistent(pdev,
1948                             sizeof(struct adm8211_desc) * priv->rx_ring_size +
1949                             sizeof(struct adm8211_desc) * priv->tx_ring_size,
1950                             priv->rx_ring, priv->rx_ring_dma);
1951
1952         kfree(priv->rx_buffers);
1953         kfree(priv->eeprom);
1954         pci_iounmap(pdev, priv->map);
1955         pci_release_regions(pdev);
1956         pci_disable_device(pdev);
1957         ieee80211_free_hw(dev);
1958 }
1959
1960
1961 #ifdef CONFIG_PM
1962 static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state)
1963 {
1964         struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1965         struct adm8211_priv *priv = dev->priv;
1966
1967         if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) {
1968                 ieee80211_stop_queues(dev);
1969                 adm8211_stop(dev);
1970         }
1971
1972         pci_save_state(pdev);
1973         pci_set_power_state(pdev, pci_choose_state(pdev, state));
1974         return 0;
1975 }
1976
1977 static int adm8211_resume(struct pci_dev *pdev)
1978 {
1979         struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1980         struct adm8211_priv *priv = dev->priv;
1981
1982         pci_set_power_state(pdev, PCI_D0);
1983         pci_restore_state(pdev);
1984
1985         if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) {
1986                 adm8211_start(dev);
1987                 ieee80211_wake_queues(dev);
1988         }
1989
1990         return 0;
1991 }
1992 #endif /* CONFIG_PM */
1993
1994
1995 MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table);
1996
1997 /* TODO: implement enable_wake */
1998 static struct pci_driver adm8211_driver = {
1999         .name           = "adm8211",
2000         .id_table       = adm8211_pci_id_table,
2001         .probe          = adm8211_probe,
2002         .remove         = __devexit_p(adm8211_remove),
2003 #ifdef CONFIG_PM
2004         .suspend        = adm8211_suspend,
2005         .resume         = adm8211_resume,
2006 #endif /* CONFIG_PM */
2007 };
2008
2009
2010
2011 static int __init adm8211_init(void)
2012 {
2013         return pci_register_driver(&adm8211_driver);
2014 }
2015
2016
2017 static void __exit adm8211_exit(void)
2018 {
2019         pci_unregister_driver(&adm8211_driver);
2020 }
2021
2022
2023 module_init(adm8211_init);
2024 module_exit(adm8211_exit);