Merge git://git.infradead.org/embedded-2.6
[linux-2.6] / drivers / acpi / thermal.c
1 /*
2  *  acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $)
3  *
4  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6  *
7  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
8  *
9  *  This program is free software; you can redistribute it and/or modify
10  *  it under the terms of the GNU General Public License as published by
11  *  the Free Software Foundation; either version 2 of the License, or (at
12  *  your option) any later version.
13  *
14  *  This program is distributed in the hope that it will be useful, but
15  *  WITHOUT ANY WARRANTY; without even the implied warranty of
16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  *  General Public License for more details.
18  *
19  *  You should have received a copy of the GNU General Public License along
20  *  with this program; if not, write to the Free Software Foundation, Inc.,
21  *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
22  *
23  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
24  *
25  *  This driver fully implements the ACPI thermal policy as described in the
26  *  ACPI 2.0 Specification.
27  *
28  *  TBD: 1. Implement passive cooling hysteresis.
29  *       2. Enhance passive cooling (CPU) states/limit interface to support
30  *          concepts of 'multiple limiters', upper/lower limits, etc.
31  *
32  */
33
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/dmi.h>
37 #include <linux/init.h>
38 #include <linux/types.h>
39 #include <linux/proc_fs.h>
40 #include <linux/timer.h>
41 #include <linux/jiffies.h>
42 #include <linux/kmod.h>
43 #include <linux/seq_file.h>
44 #include <linux/reboot.h>
45 #include <asm/uaccess.h>
46 #include <linux/thermal.h>
47 #include <acpi/acpi_bus.h>
48 #include <acpi/acpi_drivers.h>
49
50 #define ACPI_THERMAL_COMPONENT          0x04000000
51 #define ACPI_THERMAL_CLASS              "thermal_zone"
52 #define ACPI_THERMAL_DEVICE_NAME        "Thermal Zone"
53 #define ACPI_THERMAL_FILE_STATE         "state"
54 #define ACPI_THERMAL_FILE_TEMPERATURE   "temperature"
55 #define ACPI_THERMAL_FILE_TRIP_POINTS   "trip_points"
56 #define ACPI_THERMAL_FILE_COOLING_MODE  "cooling_mode"
57 #define ACPI_THERMAL_FILE_POLLING_FREQ  "polling_frequency"
58 #define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
59 #define ACPI_THERMAL_NOTIFY_THRESHOLDS  0x81
60 #define ACPI_THERMAL_NOTIFY_DEVICES     0x82
61 #define ACPI_THERMAL_NOTIFY_CRITICAL    0xF0
62 #define ACPI_THERMAL_NOTIFY_HOT         0xF1
63 #define ACPI_THERMAL_MODE_ACTIVE        0x00
64
65 #define ACPI_THERMAL_MAX_ACTIVE 10
66 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
67
68 #define _COMPONENT              ACPI_THERMAL_COMPONENT
69 ACPI_MODULE_NAME("thermal");
70
71 MODULE_AUTHOR("Paul Diefenbaugh");
72 MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
73 MODULE_LICENSE("GPL");
74
75 static int act;
76 module_param(act, int, 0644);
77 MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
78
79 static int crt;
80 module_param(crt, int, 0644);
81 MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
82
83 static int tzp;
84 module_param(tzp, int, 0444);
85 MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
86
87 static int nocrt;
88 module_param(nocrt, int, 0);
89 MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
90
91 static int off;
92 module_param(off, int, 0);
93 MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
94
95 static int psv;
96 module_param(psv, int, 0644);
97 MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
98
99 static int acpi_thermal_add(struct acpi_device *device);
100 static int acpi_thermal_remove(struct acpi_device *device, int type);
101 static int acpi_thermal_resume(struct acpi_device *device);
102 static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
103 static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
104 static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
105 static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
106 static ssize_t acpi_thermal_write_cooling_mode(struct file *,
107                                                const char __user *, size_t,
108                                                loff_t *);
109 static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
110 static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
111                                           size_t, loff_t *);
112
113 static const struct acpi_device_id  thermal_device_ids[] = {
114         {ACPI_THERMAL_HID, 0},
115         {"", 0},
116 };
117 MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
118
119 static struct acpi_driver acpi_thermal_driver = {
120         .name = "thermal",
121         .class = ACPI_THERMAL_CLASS,
122         .ids = thermal_device_ids,
123         .ops = {
124                 .add = acpi_thermal_add,
125                 .remove = acpi_thermal_remove,
126                 .resume = acpi_thermal_resume,
127                 },
128 };
129
130 struct acpi_thermal_state {
131         u8 critical:1;
132         u8 hot:1;
133         u8 passive:1;
134         u8 active:1;
135         u8 reserved:4;
136         int active_index;
137 };
138
139 struct acpi_thermal_state_flags {
140         u8 valid:1;
141         u8 enabled:1;
142         u8 reserved:6;
143 };
144
145 struct acpi_thermal_critical {
146         struct acpi_thermal_state_flags flags;
147         unsigned long temperature;
148 };
149
150 struct acpi_thermal_hot {
151         struct acpi_thermal_state_flags flags;
152         unsigned long temperature;
153 };
154
155 struct acpi_thermal_passive {
156         struct acpi_thermal_state_flags flags;
157         unsigned long temperature;
158         unsigned long tc1;
159         unsigned long tc2;
160         unsigned long tsp;
161         struct acpi_handle_list devices;
162 };
163
164 struct acpi_thermal_active {
165         struct acpi_thermal_state_flags flags;
166         unsigned long temperature;
167         struct acpi_handle_list devices;
168 };
169
170 struct acpi_thermal_trips {
171         struct acpi_thermal_critical critical;
172         struct acpi_thermal_hot hot;
173         struct acpi_thermal_passive passive;
174         struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
175 };
176
177 struct acpi_thermal_flags {
178         u8 cooling_mode:1;      /* _SCP */
179         u8 devices:1;           /* _TZD */
180         u8 reserved:6;
181 };
182
183 struct acpi_thermal {
184         struct acpi_device * device;
185         acpi_bus_id name;
186         unsigned long temperature;
187         unsigned long last_temperature;
188         unsigned long polling_frequency;
189         volatile u8 zombie;
190         struct acpi_thermal_flags flags;
191         struct acpi_thermal_state state;
192         struct acpi_thermal_trips trips;
193         struct acpi_handle_list devices;
194         struct timer_list timer;
195         struct thermal_zone_device *thermal_zone;
196         int tz_enabled;
197         struct mutex lock;
198 };
199
200 static const struct file_operations acpi_thermal_state_fops = {
201         .owner = THIS_MODULE,
202         .open = acpi_thermal_state_open_fs,
203         .read = seq_read,
204         .llseek = seq_lseek,
205         .release = single_release,
206 };
207
208 static const struct file_operations acpi_thermal_temp_fops = {
209         .owner = THIS_MODULE,
210         .open = acpi_thermal_temp_open_fs,
211         .read = seq_read,
212         .llseek = seq_lseek,
213         .release = single_release,
214 };
215
216 static const struct file_operations acpi_thermal_trip_fops = {
217         .owner = THIS_MODULE,
218         .open = acpi_thermal_trip_open_fs,
219         .read = seq_read,
220         .llseek = seq_lseek,
221         .release = single_release,
222 };
223
224 static const struct file_operations acpi_thermal_cooling_fops = {
225         .owner = THIS_MODULE,
226         .open = acpi_thermal_cooling_open_fs,
227         .read = seq_read,
228         .write = acpi_thermal_write_cooling_mode,
229         .llseek = seq_lseek,
230         .release = single_release,
231 };
232
233 static const struct file_operations acpi_thermal_polling_fops = {
234         .owner = THIS_MODULE,
235         .open = acpi_thermal_polling_open_fs,
236         .read = seq_read,
237         .write = acpi_thermal_write_polling,
238         .llseek = seq_lseek,
239         .release = single_release,
240 };
241
242 /* --------------------------------------------------------------------------
243                              Thermal Zone Management
244    -------------------------------------------------------------------------- */
245
246 static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
247 {
248         acpi_status status = AE_OK;
249
250
251         if (!tz)
252                 return -EINVAL;
253
254         tz->last_temperature = tz->temperature;
255
256         status =
257             acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tz->temperature);
258         if (ACPI_FAILURE(status))
259                 return -ENODEV;
260
261         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
262                           tz->temperature));
263
264         return 0;
265 }
266
267 static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
268 {
269         acpi_status status = AE_OK;
270
271
272         if (!tz)
273                 return -EINVAL;
274
275         status =
276             acpi_evaluate_integer(tz->device->handle, "_TZP", NULL,
277                                   &tz->polling_frequency);
278         if (ACPI_FAILURE(status))
279                 return -ENODEV;
280
281         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
282                           tz->polling_frequency));
283
284         return 0;
285 }
286
287 static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
288 {
289
290         if (!tz)
291                 return -EINVAL;
292
293         tz->polling_frequency = seconds * 10;   /* Convert value to deci-seconds */
294
295         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
296                           "Polling frequency set to %lu seconds\n",
297                           tz->polling_frequency/10));
298
299         return 0;
300 }
301
302 static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
303 {
304         acpi_status status = AE_OK;
305         union acpi_object arg0 = { ACPI_TYPE_INTEGER };
306         struct acpi_object_list arg_list = { 1, &arg0 };
307         acpi_handle handle = NULL;
308
309
310         if (!tz)
311                 return -EINVAL;
312
313         status = acpi_get_handle(tz->device->handle, "_SCP", &handle);
314         if (ACPI_FAILURE(status)) {
315                 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
316                 return -ENODEV;
317         }
318
319         arg0.integer.value = mode;
320
321         status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
322         if (ACPI_FAILURE(status))
323                 return -ENODEV;
324
325         return 0;
326 }
327
328 #define ACPI_TRIPS_CRITICAL     0x01
329 #define ACPI_TRIPS_HOT          0x02
330 #define ACPI_TRIPS_PASSIVE      0x04
331 #define ACPI_TRIPS_ACTIVE       0x08
332 #define ACPI_TRIPS_DEVICES      0x10
333
334 #define ACPI_TRIPS_REFRESH_THRESHOLDS   (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
335 #define ACPI_TRIPS_REFRESH_DEVICES      ACPI_TRIPS_DEVICES
336
337 #define ACPI_TRIPS_INIT      (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT |    \
338                               ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE |  \
339                               ACPI_TRIPS_DEVICES)
340
341 /*
342  * This exception is thrown out in two cases:
343  * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
344  *   when re-evaluating the AML code.
345  * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
346  *   We need to re-bind the cooling devices of a thermal zone when this occurs.
347  */
348 #define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str)        \
349 do {    \
350         if (flags != ACPI_TRIPS_INIT)   \
351                 ACPI_EXCEPTION((AE_INFO, AE_ERROR,      \
352                 "ACPI thermal trip point %s changed\n"  \
353                 "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
354 } while (0)
355
356 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
357 {
358         acpi_status status = AE_OK;
359         struct acpi_handle_list devices;
360         int valid = 0;
361         int i;
362
363         /* Critical Shutdown (required) */
364         if (flag & ACPI_TRIPS_CRITICAL) {
365                 status = acpi_evaluate_integer(tz->device->handle,
366                                 "_CRT", NULL, &tz->trips.critical.temperature);
367                 /*
368                  * Treat freezing temperatures as invalid as well; some
369                  * BIOSes return really low values and cause reboots at startup.
370                  * Below zero (Celcius) values clearly aren't right for sure..
371                  * ... so lets discard those as invalid.
372                  */
373                 if (ACPI_FAILURE(status) ||
374                                 tz->trips.critical.temperature <= 2732) {
375                         tz->trips.critical.flags.valid = 0;
376                         ACPI_EXCEPTION((AE_INFO, status,
377                                         "No or invalid critical threshold"));
378                         return -ENODEV;
379                 } else {
380                         tz->trips.critical.flags.valid = 1;
381                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
382                                         "Found critical threshold [%lu]\n",
383                                         tz->trips.critical.temperature));
384                 }
385                 if (tz->trips.critical.flags.valid == 1) {
386                         if (crt == -1) {
387                                 tz->trips.critical.flags.valid = 0;
388                         } else if (crt > 0) {
389                                 unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
390                                 /*
391                                  * Allow override to lower critical threshold
392                                  */
393                                 if (crt_k < tz->trips.critical.temperature)
394                                         tz->trips.critical.temperature = crt_k;
395                         }
396                 }
397         }
398
399         /* Critical Sleep (optional) */
400         if (flag & ACPI_TRIPS_HOT) {
401                 status = acpi_evaluate_integer(tz->device->handle,
402                                 "_HOT", NULL, &tz->trips.hot.temperature);
403                 if (ACPI_FAILURE(status)) {
404                         tz->trips.hot.flags.valid = 0;
405                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
406                                         "No hot threshold\n"));
407                 } else {
408                         tz->trips.hot.flags.valid = 1;
409                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
410                                         "Found hot threshold [%lu]\n",
411                                         tz->trips.critical.temperature));
412                 }
413         }
414
415         /* Passive (optional) */
416         if (flag & ACPI_TRIPS_PASSIVE) {
417                 valid = tz->trips.passive.flags.valid;
418                 if (psv == -1) {
419                         status = AE_SUPPORT;
420                 } else if (psv > 0) {
421                         tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv);
422                         status = AE_OK;
423                 } else {
424                         status = acpi_evaluate_integer(tz->device->handle,
425                                 "_PSV", NULL, &tz->trips.passive.temperature);
426                 }
427
428                 if (ACPI_FAILURE(status))
429                         tz->trips.passive.flags.valid = 0;
430                 else {
431                         tz->trips.passive.flags.valid = 1;
432                         if (flag == ACPI_TRIPS_INIT) {
433                                 status = acpi_evaluate_integer(
434                                                 tz->device->handle, "_TC1",
435                                                 NULL, &tz->trips.passive.tc1);
436                                 if (ACPI_FAILURE(status))
437                                         tz->trips.passive.flags.valid = 0;
438                                 status = acpi_evaluate_integer(
439                                                 tz->device->handle, "_TC2",
440                                                 NULL, &tz->trips.passive.tc2);
441                                 if (ACPI_FAILURE(status))
442                                         tz->trips.passive.flags.valid = 0;
443                                 status = acpi_evaluate_integer(
444                                                 tz->device->handle, "_TSP",
445                                                 NULL, &tz->trips.passive.tsp);
446                                 if (ACPI_FAILURE(status))
447                                         tz->trips.passive.flags.valid = 0;
448                         }
449                 }
450         }
451         if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
452                 memset(&devices, 0, sizeof(struct acpi_handle_list));
453                 status = acpi_evaluate_reference(tz->device->handle, "_PSL",
454                                                         NULL, &devices);
455                 if (ACPI_FAILURE(status))
456                         tz->trips.passive.flags.valid = 0;
457                 else
458                         tz->trips.passive.flags.valid = 1;
459
460                 if (memcmp(&tz->trips.passive.devices, &devices,
461                                 sizeof(struct acpi_handle_list))) {
462                         memcpy(&tz->trips.passive.devices, &devices,
463                                 sizeof(struct acpi_handle_list));
464                         ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
465                 }
466         }
467         if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
468                 if (valid != tz->trips.passive.flags.valid)
469                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
470         }
471
472         /* Active (optional) */
473         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
474                 char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
475                 valid = tz->trips.active[i].flags.valid;
476
477                 if (act == -1)
478                         break; /* disable all active trip points */
479
480                 if (flag & ACPI_TRIPS_ACTIVE) {
481                         status = acpi_evaluate_integer(tz->device->handle,
482                                 name, NULL, &tz->trips.active[i].temperature);
483                         if (ACPI_FAILURE(status)) {
484                                 tz->trips.active[i].flags.valid = 0;
485                                 if (i == 0)
486                                         break;
487                                 if (act <= 0)
488                                         break;
489                                 if (i == 1)
490                                         tz->trips.active[0].temperature =
491                                                 CELSIUS_TO_KELVIN(act);
492                                 else
493                                         /*
494                                          * Don't allow override higher than
495                                          * the next higher trip point
496                                          */
497                                         tz->trips.active[i - 1].temperature =
498                                                 (tz->trips.active[i - 2].temperature <
499                                                 CELSIUS_TO_KELVIN(act) ?
500                                                 tz->trips.active[i - 2].temperature :
501                                                 CELSIUS_TO_KELVIN(act));
502                                 break;
503                         } else
504                                 tz->trips.active[i].flags.valid = 1;
505                 }
506
507                 name[2] = 'L';
508                 if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
509                         memset(&devices, 0, sizeof(struct acpi_handle_list));
510                         status = acpi_evaluate_reference(tz->device->handle,
511                                                 name, NULL, &devices);
512                         if (ACPI_FAILURE(status))
513                                 tz->trips.active[i].flags.valid = 0;
514                         else
515                                 tz->trips.active[i].flags.valid = 1;
516
517                         if (memcmp(&tz->trips.active[i].devices, &devices,
518                                         sizeof(struct acpi_handle_list))) {
519                                 memcpy(&tz->trips.active[i].devices, &devices,
520                                         sizeof(struct acpi_handle_list));
521                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
522                         }
523                 }
524                 if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
525                         if (valid != tz->trips.active[i].flags.valid)
526                                 ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
527
528                 if (!tz->trips.active[i].flags.valid)
529                         break;
530         }
531
532         if (flag & ACPI_TRIPS_DEVICES) {
533                 memset(&devices, 0, sizeof(struct acpi_handle_list));
534                 status = acpi_evaluate_reference(tz->device->handle, "_TZD",
535                                                 NULL, &devices);
536                 if (memcmp(&tz->devices, &devices,
537                                 sizeof(struct acpi_handle_list))) {
538                         memcpy(&tz->devices, &devices,
539                                 sizeof(struct acpi_handle_list));
540                         ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
541                 }
542         }
543
544         return 0;
545 }
546
547 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
548 {
549         return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
550 }
551
552 static int acpi_thermal_critical(struct acpi_thermal *tz)
553 {
554         if (!tz || !tz->trips.critical.flags.valid)
555                 return -EINVAL;
556
557         if (tz->temperature >= tz->trips.critical.temperature) {
558                 printk(KERN_WARNING PREFIX "Critical trip point\n");
559                 tz->trips.critical.flags.enabled = 1;
560         } else if (tz->trips.critical.flags.enabled)
561                 tz->trips.critical.flags.enabled = 0;
562
563         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
564                                 tz->trips.critical.flags.enabled);
565         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
566                                           tz->device->dev.bus_id,
567                                           ACPI_THERMAL_NOTIFY_CRITICAL,
568                                           tz->trips.critical.flags.enabled);
569
570         /* take no action if nocrt is set */
571         if(!nocrt) {
572                 printk(KERN_EMERG
573                         "Critical temperature reached (%ld C), shutting down.\n",
574                         KELVIN_TO_CELSIUS(tz->temperature));
575                 orderly_poweroff(true);
576         }
577
578         return 0;
579 }
580
581 static int acpi_thermal_hot(struct acpi_thermal *tz)
582 {
583         if (!tz || !tz->trips.hot.flags.valid)
584                 return -EINVAL;
585
586         if (tz->temperature >= tz->trips.hot.temperature) {
587                 printk(KERN_WARNING PREFIX "Hot trip point\n");
588                 tz->trips.hot.flags.enabled = 1;
589         } else if (tz->trips.hot.flags.enabled)
590                 tz->trips.hot.flags.enabled = 0;
591
592         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
593                                 tz->trips.hot.flags.enabled);
594         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
595                                           tz->device->dev.bus_id,
596                                           ACPI_THERMAL_NOTIFY_HOT,
597                                           tz->trips.hot.flags.enabled);
598
599         /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
600
601         return 0;
602 }
603
604 static void acpi_thermal_passive(struct acpi_thermal *tz)
605 {
606         int result = 1;
607         struct acpi_thermal_passive *passive = NULL;
608         int trend = 0;
609         int i = 0;
610
611
612         if (!tz || !tz->trips.passive.flags.valid)
613                 return;
614
615         passive = &(tz->trips.passive);
616
617         /*
618          * Above Trip?
619          * -----------
620          * Calculate the thermal trend (using the passive cooling equation)
621          * and modify the performance limit for all passive cooling devices
622          * accordingly.  Note that we assume symmetry.
623          */
624         if (tz->temperature >= passive->temperature) {
625                 trend =
626                     (passive->tc1 * (tz->temperature - tz->last_temperature)) +
627                     (passive->tc2 * (tz->temperature - passive->temperature));
628                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
629                                   "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
630                                   trend, passive->tc1, tz->temperature,
631                                   tz->last_temperature, passive->tc2,
632                                   tz->temperature, passive->temperature));
633                 passive->flags.enabled = 1;
634                 /* Heating up? */
635                 if (trend > 0)
636                         for (i = 0; i < passive->devices.count; i++)
637                                 acpi_processor_set_thermal_limit(passive->
638                                                                  devices.
639                                                                  handles[i],
640                                                                  ACPI_PROCESSOR_LIMIT_INCREMENT);
641                 /* Cooling off? */
642                 else if (trend < 0) {
643                         for (i = 0; i < passive->devices.count; i++)
644                                 /*
645                                  * assume that we are on highest
646                                  * freq/lowest thrott and can leave
647                                  * passive mode, even in error case
648                                  */
649                                 if (!acpi_processor_set_thermal_limit
650                                     (passive->devices.handles[i],
651                                      ACPI_PROCESSOR_LIMIT_DECREMENT))
652                                         result = 0;
653                         /*
654                          * Leave cooling mode, even if the temp might
655                          * higher than trip point This is because some
656                          * machines might have long thermal polling
657                          * frequencies (tsp) defined. We will fall back
658                          * into passive mode in next cycle (probably quicker)
659                          */
660                         if (result) {
661                                 passive->flags.enabled = 0;
662                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
663                                                   "Disabling passive cooling, still above threshold,"
664                                                   " but we are cooling down\n"));
665                         }
666                 }
667                 return;
668         }
669
670         /*
671          * Below Trip?
672          * -----------
673          * Implement passive cooling hysteresis to slowly increase performance
674          * and avoid thrashing around the passive trip point.  Note that we
675          * assume symmetry.
676          */
677         if (!passive->flags.enabled)
678                 return;
679         for (i = 0; i < passive->devices.count; i++)
680                 if (!acpi_processor_set_thermal_limit
681                     (passive->devices.handles[i],
682                      ACPI_PROCESSOR_LIMIT_DECREMENT))
683                         result = 0;
684         if (result) {
685                 passive->flags.enabled = 0;
686                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
687                                   "Disabling passive cooling (zone is cool)\n"));
688         }
689 }
690
691 static void acpi_thermal_active(struct acpi_thermal *tz)
692 {
693         int result = 0;
694         struct acpi_thermal_active *active = NULL;
695         int i = 0;
696         int j = 0;
697         unsigned long maxtemp = 0;
698
699
700         if (!tz)
701                 return;
702
703         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
704                 active = &(tz->trips.active[i]);
705                 if (!active || !active->flags.valid)
706                         break;
707                 if (tz->temperature >= active->temperature) {
708                         /*
709                          * Above Threshold?
710                          * ----------------
711                          * If not already enabled, turn ON all cooling devices
712                          * associated with this active threshold.
713                          */
714                         if (active->temperature > maxtemp)
715                                 tz->state.active_index = i;
716                         maxtemp = active->temperature;
717                         if (active->flags.enabled)
718                                 continue;
719                         for (j = 0; j < active->devices.count; j++) {
720                                 result =
721                                     acpi_bus_set_power(active->devices.
722                                                        handles[j],
723                                                        ACPI_STATE_D0);
724                                 if (result) {
725                                         printk(KERN_WARNING PREFIX
726                                                       "Unable to turn cooling device [%p] 'on'\n",
727                                                       active->devices.
728                                                       handles[j]);
729                                         continue;
730                                 }
731                                 active->flags.enabled = 1;
732                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
733                                                   "Cooling device [%p] now 'on'\n",
734                                                   active->devices.handles[j]));
735                         }
736                         continue;
737                 }
738                 if (!active->flags.enabled)
739                         continue;
740                 /*
741                  * Below Threshold?
742                  * ----------------
743                  * Turn OFF all cooling devices associated with this
744                  * threshold.
745                  */
746                 for (j = 0; j < active->devices.count; j++) {
747                         result = acpi_bus_set_power(active->devices.handles[j],
748                                                     ACPI_STATE_D3);
749                         if (result) {
750                                 printk(KERN_WARNING PREFIX
751                                               "Unable to turn cooling device [%p] 'off'\n",
752                                               active->devices.handles[j]);
753                                 continue;
754                         }
755                         active->flags.enabled = 0;
756                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
757                                           "Cooling device [%p] now 'off'\n",
758                                           active->devices.handles[j]));
759                 }
760         }
761 }
762
763 static void acpi_thermal_check(void *context);
764
765 static void acpi_thermal_run(unsigned long data)
766 {
767         struct acpi_thermal *tz = (struct acpi_thermal *)data;
768         if (!tz->zombie)
769                 acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
770 }
771
772 static void acpi_thermal_active_off(void *data)
773 {
774         int result = 0;
775         struct acpi_thermal *tz = data;
776         int i = 0;
777         int j = 0;
778         struct acpi_thermal_active *active = NULL;
779
780         if (!tz) {
781                 printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
782                 return;
783         }
784
785         result = acpi_thermal_get_temperature(tz);
786         if (result)
787                 return;
788
789         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
790                 active = &(tz->trips.active[i]);
791                 if (!active || !active->flags.valid)
792                         break;
793                 if (tz->temperature >= active->temperature) {
794                         /*
795                          * If the thermal temperature is greater than the
796                          * active threshod, unnecessary to turn off the
797                          * the active cooling device.
798                          */
799                         continue;
800                 }
801                 /*
802                  * Below Threshold?
803                  * ----------------
804                  * Turn OFF all cooling devices associated with this
805                  * threshold.
806                  */
807                 for (j = 0; j < active->devices.count; j++)
808                         result = acpi_bus_set_power(active->devices.handles[j],
809                                                     ACPI_STATE_D3);
810         }
811 }
812
813 static void acpi_thermal_check(void *data)
814 {
815         int result = 0;
816         struct acpi_thermal *tz = data;
817         unsigned long sleep_time = 0;
818         unsigned long timeout_jiffies = 0;
819         int i = 0;
820         struct acpi_thermal_state state;
821
822
823         if (!tz) {
824                 printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
825                 return;
826         }
827
828         /* Check if someone else is already running */
829         if (!mutex_trylock(&tz->lock))
830                 return;
831
832         state = tz->state;
833
834         result = acpi_thermal_get_temperature(tz);
835         if (result)
836                 goto unlock;
837
838         if (!tz->tz_enabled)
839                 goto unlock;
840
841         memset(&tz->state, 0, sizeof(tz->state));
842
843         /*
844          * Check Trip Points
845          * -----------------
846          * Compare the current temperature to the trip point values to see
847          * if we've entered one of the thermal policy states.  Note that
848          * this function determines when a state is entered, but the 
849          * individual policy decides when it is exited (e.g. hysteresis).
850          */
851         if (tz->trips.critical.flags.valid)
852                 state.critical |=
853                     (tz->temperature >= tz->trips.critical.temperature);
854         if (tz->trips.hot.flags.valid)
855                 state.hot |= (tz->temperature >= tz->trips.hot.temperature);
856         if (tz->trips.passive.flags.valid)
857                 state.passive |=
858                     (tz->temperature >= tz->trips.passive.temperature);
859         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
860                 if (tz->trips.active[i].flags.valid)
861                         state.active |=
862                             (tz->temperature >=
863                              tz->trips.active[i].temperature);
864
865         /*
866          * Invoke Policy
867          * -------------
868          * Separated from the above check to allow individual policy to 
869          * determine when to exit a given state.
870          */
871         if (state.critical)
872                 acpi_thermal_critical(tz);
873         if (state.hot)
874                 acpi_thermal_hot(tz);
875         if (state.passive)
876                 acpi_thermal_passive(tz);
877         if (state.active)
878                 acpi_thermal_active(tz);
879
880         /*
881          * Calculate State
882          * ---------------
883          * Again, separated from the above two to allow independent policy
884          * decisions.
885          */
886         tz->state.critical = tz->trips.critical.flags.enabled;
887         tz->state.hot = tz->trips.hot.flags.enabled;
888         tz->state.passive = tz->trips.passive.flags.enabled;
889         tz->state.active = 0;
890         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
891                 tz->state.active |= tz->trips.active[i].flags.enabled;
892
893         /*
894          * Calculate Sleep Time
895          * --------------------
896          * If we're in the passive state, use _TSP's value.  Otherwise
897          * use the default polling frequency (e.g. _TZP).  If no polling
898          * frequency is specified then we'll wait forever (at least until
899          * a thermal event occurs).  Note that _TSP and _TZD values are
900          * given in 1/10th seconds (we must covert to milliseconds).
901          */
902         if (tz->state.passive) {
903                 sleep_time = tz->trips.passive.tsp * 100;
904                 timeout_jiffies =  jiffies + (HZ * sleep_time) / 1000;
905         } else if (tz->polling_frequency > 0) {
906                 sleep_time = tz->polling_frequency * 100;
907                 timeout_jiffies =  round_jiffies(jiffies + (HZ * sleep_time) / 1000);
908         }
909
910         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
911                           tz->name, tz->temperature, sleep_time));
912
913         /*
914          * Schedule Next Poll
915          * ------------------
916          */
917         if (!sleep_time) {
918                 if (timer_pending(&(tz->timer)))
919                         del_timer(&(tz->timer));
920         } else {
921                 if (timer_pending(&(tz->timer)))
922                         mod_timer(&(tz->timer), timeout_jiffies);
923                 else {
924                         tz->timer.data = (unsigned long)tz;
925                         tz->timer.function = acpi_thermal_run;
926                         tz->timer.expires = timeout_jiffies;
927                         add_timer(&(tz->timer));
928                 }
929         }
930       unlock:
931         mutex_unlock(&tz->lock);
932 }
933
934 /* sys I/F for generic thermal sysfs support */
935 #define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
936
937 static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
938 {
939         struct acpi_thermal *tz = thermal->devdata;
940         int result;
941
942         if (!tz)
943                 return -EINVAL;
944
945         result = acpi_thermal_get_temperature(tz);
946         if (result)
947                 return result;
948
949         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
950 }
951
952 static const char enabled[] = "kernel";
953 static const char disabled[] = "user";
954 static int thermal_get_mode(struct thermal_zone_device *thermal,
955                                 char *buf)
956 {
957         struct acpi_thermal *tz = thermal->devdata;
958
959         if (!tz)
960                 return -EINVAL;
961
962         return sprintf(buf, "%s\n", tz->tz_enabled ?
963                         enabled : disabled);
964 }
965
966 static int thermal_set_mode(struct thermal_zone_device *thermal,
967                                 const char *buf)
968 {
969         struct acpi_thermal *tz = thermal->devdata;
970         int enable;
971
972         if (!tz)
973                 return -EINVAL;
974
975         /*
976          * enable/disable thermal management from ACPI thermal driver
977          */
978         if (!strncmp(buf, enabled, sizeof enabled - 1))
979                 enable = 1;
980         else if (!strncmp(buf, disabled, sizeof disabled - 1))
981                 enable = 0;
982         else
983                 return -EINVAL;
984
985         if (enable != tz->tz_enabled) {
986                 tz->tz_enabled = enable;
987                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
988                         "%s ACPI thermal control\n",
989                         tz->tz_enabled ? enabled : disabled));
990                 acpi_thermal_check(tz);
991         }
992         return 0;
993 }
994
995 static int thermal_get_trip_type(struct thermal_zone_device *thermal,
996                                  int trip, char *buf)
997 {
998         struct acpi_thermal *tz = thermal->devdata;
999         int i;
1000
1001         if (!tz || trip < 0)
1002                 return -EINVAL;
1003
1004         if (tz->trips.critical.flags.valid) {
1005                 if (!trip)
1006                         return sprintf(buf, "critical\n");
1007                 trip--;
1008         }
1009
1010         if (tz->trips.hot.flags.valid) {
1011                 if (!trip)
1012                         return sprintf(buf, "hot\n");
1013                 trip--;
1014         }
1015
1016         if (tz->trips.passive.flags.valid) {
1017                 if (!trip)
1018                         return sprintf(buf, "passive\n");
1019                 trip--;
1020         }
1021
1022         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1023                 tz->trips.active[i].flags.valid; i++) {
1024                 if (!trip)
1025                         return sprintf(buf, "active%d\n", i);
1026                 trip--;
1027         }
1028
1029         return -EINVAL;
1030 }
1031
1032 static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
1033                                  int trip, char *buf)
1034 {
1035         struct acpi_thermal *tz = thermal->devdata;
1036         int i;
1037
1038         if (!tz || trip < 0)
1039                 return -EINVAL;
1040
1041         if (tz->trips.critical.flags.valid) {
1042                 if (!trip)
1043                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1044                                 tz->trips.critical.temperature));
1045                 trip--;
1046         }
1047
1048         if (tz->trips.hot.flags.valid) {
1049                 if (!trip)
1050                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1051                                         tz->trips.hot.temperature));
1052                 trip--;
1053         }
1054
1055         if (tz->trips.passive.flags.valid) {
1056                 if (!trip)
1057                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1058                                         tz->trips.passive.temperature));
1059                 trip--;
1060         }
1061
1062         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1063                 tz->trips.active[i].flags.valid; i++) {
1064                 if (!trip)
1065                         return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
1066                                         tz->trips.active[i].temperature));
1067                 trip--;
1068         }
1069
1070         return -EINVAL;
1071 }
1072
1073 static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
1074                                 unsigned long *temperature) {
1075         struct acpi_thermal *tz = thermal->devdata;
1076
1077         if (tz->trips.critical.flags.valid) {
1078                 *temperature = KELVIN_TO_MILLICELSIUS(
1079                                 tz->trips.critical.temperature);
1080                 return 0;
1081         } else
1082                 return -EINVAL;
1083 }
1084
1085 typedef int (*cb)(struct thermal_zone_device *, int,
1086                   struct thermal_cooling_device *);
1087 static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
1088                                         struct thermal_cooling_device *cdev,
1089                                         cb action)
1090 {
1091         struct acpi_device *device = cdev->devdata;
1092         struct acpi_thermal *tz = thermal->devdata;
1093         struct acpi_device *dev;
1094         acpi_status status;
1095         acpi_handle handle;
1096         int i;
1097         int j;
1098         int trip = -1;
1099         int result = 0;
1100
1101         if (tz->trips.critical.flags.valid)
1102                 trip++;
1103
1104         if (tz->trips.hot.flags.valid)
1105                 trip++;
1106
1107         if (tz->trips.passive.flags.valid) {
1108                 trip++;
1109                 for (i = 0; i < tz->trips.passive.devices.count;
1110                     i++) {
1111                         handle = tz->trips.passive.devices.handles[i];
1112                         status = acpi_bus_get_device(handle, &dev);
1113                         if (ACPI_SUCCESS(status) && (dev == device)) {
1114                                 result = action(thermal, trip, cdev);
1115                                 if (result)
1116                                         goto failed;
1117                         }
1118                 }
1119         }
1120
1121         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1122                 if (!tz->trips.active[i].flags.valid)
1123                         break;
1124                 trip++;
1125                 for (j = 0;
1126                     j < tz->trips.active[i].devices.count;
1127                     j++) {
1128                         handle = tz->trips.active[i].devices.handles[j];
1129                         status = acpi_bus_get_device(handle, &dev);
1130                         if (ACPI_SUCCESS(status) && (dev == device)) {
1131                                 result = action(thermal, trip, cdev);
1132                                 if (result)
1133                                         goto failed;
1134                         }
1135                 }
1136         }
1137
1138         for (i = 0; i < tz->devices.count; i++) {
1139                 handle = tz->devices.handles[i];
1140                 status = acpi_bus_get_device(handle, &dev);
1141                 if (ACPI_SUCCESS(status) && (dev == device)) {
1142                         result = action(thermal, -1, cdev);
1143                         if (result)
1144                                 goto failed;
1145                 }
1146         }
1147
1148 failed:
1149         return result;
1150 }
1151
1152 static int
1153 acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
1154                                         struct thermal_cooling_device *cdev)
1155 {
1156         return acpi_thermal_cooling_device_cb(thermal, cdev,
1157                                 thermal_zone_bind_cooling_device);
1158 }
1159
1160 static int
1161 acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
1162                                         struct thermal_cooling_device *cdev)
1163 {
1164         return acpi_thermal_cooling_device_cb(thermal, cdev,
1165                                 thermal_zone_unbind_cooling_device);
1166 }
1167
1168 static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
1169         .bind = acpi_thermal_bind_cooling_device,
1170         .unbind = acpi_thermal_unbind_cooling_device,
1171         .get_temp = thermal_get_temp,
1172         .get_mode = thermal_get_mode,
1173         .set_mode = thermal_set_mode,
1174         .get_trip_type = thermal_get_trip_type,
1175         .get_trip_temp = thermal_get_trip_temp,
1176         .get_crit_temp = thermal_get_crit_temp,
1177 };
1178
1179 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
1180 {
1181         int trips = 0;
1182         int result;
1183         acpi_status status;
1184         int i;
1185
1186         if (tz->trips.critical.flags.valid)
1187                 trips++;
1188
1189         if (tz->trips.hot.flags.valid)
1190                 trips++;
1191
1192         if (tz->trips.passive.flags.valid)
1193                 trips++;
1194
1195         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
1196                         tz->trips.active[i].flags.valid; i++, trips++);
1197         tz->thermal_zone = thermal_zone_device_register("acpitz",
1198                                         trips, tz, &acpi_thermal_zone_ops);
1199         if (IS_ERR(tz->thermal_zone))
1200                 return -ENODEV;
1201
1202         result = sysfs_create_link(&tz->device->dev.kobj,
1203                                    &tz->thermal_zone->device.kobj, "thermal_zone");
1204         if (result)
1205                 return result;
1206
1207         result = sysfs_create_link(&tz->thermal_zone->device.kobj,
1208                                    &tz->device->dev.kobj, "device");
1209         if (result)
1210                 return result;
1211
1212         status = acpi_attach_data(tz->device->handle,
1213                                   acpi_bus_private_data_handler,
1214                                   tz->thermal_zone);
1215         if (ACPI_FAILURE(status)) {
1216                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
1217                                 "Error attaching device data\n"));
1218                 return -ENODEV;
1219         }
1220
1221         tz->tz_enabled = 1;
1222
1223         dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
1224                  tz->thermal_zone->id);
1225         return 0;
1226 }
1227
1228 static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
1229 {
1230         sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
1231         sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
1232         thermal_zone_device_unregister(tz->thermal_zone);
1233         tz->thermal_zone = NULL;
1234         acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
1235 }
1236
1237
1238 /* --------------------------------------------------------------------------
1239                               FS Interface (/proc)
1240    -------------------------------------------------------------------------- */
1241
1242 static struct proc_dir_entry *acpi_thermal_dir;
1243
1244 static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
1245 {
1246         struct acpi_thermal *tz = seq->private;
1247
1248
1249         if (!tz)
1250                 goto end;
1251
1252         seq_puts(seq, "state:                   ");
1253
1254         if (!tz->state.critical && !tz->state.hot && !tz->state.passive
1255             && !tz->state.active)
1256                 seq_puts(seq, "ok\n");
1257         else {
1258                 if (tz->state.critical)
1259                         seq_puts(seq, "critical ");
1260                 if (tz->state.hot)
1261                         seq_puts(seq, "hot ");
1262                 if (tz->state.passive)
1263                         seq_puts(seq, "passive ");
1264                 if (tz->state.active)
1265                         seq_printf(seq, "active[%d]", tz->state.active_index);
1266                 seq_puts(seq, "\n");
1267         }
1268
1269       end:
1270         return 0;
1271 }
1272
1273 static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file)
1274 {
1275         return single_open(file, acpi_thermal_state_seq_show, PDE(inode)->data);
1276 }
1277
1278 static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset)
1279 {
1280         int result = 0;
1281         struct acpi_thermal *tz = seq->private;
1282
1283
1284         if (!tz)
1285                 goto end;
1286
1287         result = acpi_thermal_get_temperature(tz);
1288         if (result)
1289                 goto end;
1290
1291         seq_printf(seq, "temperature:             %ld C\n",
1292                    KELVIN_TO_CELSIUS(tz->temperature));
1293
1294       end:
1295         return 0;
1296 }
1297
1298 static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file)
1299 {
1300         return single_open(file, acpi_thermal_temp_seq_show, PDE(inode)->data);
1301 }
1302
1303 static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
1304 {
1305         struct acpi_thermal *tz = seq->private;
1306         struct acpi_device *device;
1307         acpi_status status;
1308
1309         int i = 0;
1310         int j = 0;
1311
1312
1313         if (!tz)
1314                 goto end;
1315
1316         if (tz->trips.critical.flags.valid)
1317                 seq_printf(seq, "critical (S5):           %ld C%s",
1318                            KELVIN_TO_CELSIUS(tz->trips.critical.temperature),
1319                            nocrt ? " <disabled>\n" : "\n");
1320
1321         if (tz->trips.hot.flags.valid)
1322                 seq_printf(seq, "hot (S4):                %ld C%s",
1323                            KELVIN_TO_CELSIUS(tz->trips.hot.temperature),
1324                            nocrt ? " <disabled>\n" : "\n");
1325
1326         if (tz->trips.passive.flags.valid) {
1327                 seq_printf(seq,
1328                            "passive:                 %ld C: tc1=%lu tc2=%lu tsp=%lu devices=",
1329                            KELVIN_TO_CELSIUS(tz->trips.passive.temperature),
1330                            tz->trips.passive.tc1, tz->trips.passive.tc2,
1331                            tz->trips.passive.tsp);
1332                 for (j = 0; j < tz->trips.passive.devices.count; j++) {
1333                         status = acpi_bus_get_device(tz->trips.passive.devices.
1334                                                      handles[j], &device);
1335                         seq_printf(seq, "%4.4s ", status ? "" :
1336                                    acpi_device_bid(device));
1337                 }
1338                 seq_puts(seq, "\n");
1339         }
1340
1341         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1342                 if (!(tz->trips.active[i].flags.valid))
1343                         break;
1344                 seq_printf(seq, "active[%d]:               %ld C: devices=",
1345                            i,
1346                            KELVIN_TO_CELSIUS(tz->trips.active[i].temperature));
1347                 for (j = 0; j < tz->trips.active[i].devices.count; j++){
1348                         status = acpi_bus_get_device(tz->trips.active[i].
1349                                                      devices.handles[j],
1350                                                      &device);
1351                         seq_printf(seq, "%4.4s ", status ? "" :
1352                                    acpi_device_bid(device));
1353                 }
1354                 seq_puts(seq, "\n");
1355         }
1356
1357       end:
1358         return 0;
1359 }
1360
1361 static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file)
1362 {
1363         return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data);
1364 }
1365
1366 static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
1367 {
1368         struct acpi_thermal *tz = seq->private;
1369
1370
1371         if (!tz)
1372                 goto end;
1373
1374         if (!tz->flags.cooling_mode)
1375                 seq_puts(seq, "<setting not supported>\n");
1376         else
1377                 seq_puts(seq, "0 - Active; 1 - Passive\n");
1378
1379       end:
1380         return 0;
1381 }
1382
1383 static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file)
1384 {
1385         return single_open(file, acpi_thermal_cooling_seq_show,
1386                            PDE(inode)->data);
1387 }
1388
1389 static ssize_t
1390 acpi_thermal_write_cooling_mode(struct file *file,
1391                                 const char __user * buffer,
1392                                 size_t count, loff_t * ppos)
1393 {
1394         struct seq_file *m = file->private_data;
1395         struct acpi_thermal *tz = m->private;
1396         int result = 0;
1397         char mode_string[12] = { '\0' };
1398
1399
1400         if (!tz || (count > sizeof(mode_string) - 1))
1401                 return -EINVAL;
1402
1403         if (!tz->flags.cooling_mode)
1404                 return -ENODEV;
1405
1406         if (copy_from_user(mode_string, buffer, count))
1407                 return -EFAULT;
1408
1409         mode_string[count] = '\0';
1410
1411         result = acpi_thermal_set_cooling_mode(tz,
1412                                                simple_strtoul(mode_string, NULL,
1413                                                               0));
1414         if (result)
1415                 return result;
1416
1417         acpi_thermal_check(tz);
1418
1419         return count;
1420 }
1421
1422 static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
1423 {
1424         struct acpi_thermal *tz = seq->private;
1425
1426
1427         if (!tz)
1428                 goto end;
1429
1430         if (!tz->polling_frequency) {
1431                 seq_puts(seq, "<polling disabled>\n");
1432                 goto end;
1433         }
1434
1435         seq_printf(seq, "polling frequency:       %lu seconds\n",
1436                    (tz->polling_frequency / 10));
1437
1438       end:
1439         return 0;
1440 }
1441
1442 static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file)
1443 {
1444         return single_open(file, acpi_thermal_polling_seq_show,
1445                            PDE(inode)->data);
1446 }
1447
1448 static ssize_t
1449 acpi_thermal_write_polling(struct file *file,
1450                            const char __user * buffer,
1451                            size_t count, loff_t * ppos)
1452 {
1453         struct seq_file *m = file->private_data;
1454         struct acpi_thermal *tz = m->private;
1455         int result = 0;
1456         char polling_string[12] = { '\0' };
1457         int seconds = 0;
1458
1459
1460         if (!tz || (count > sizeof(polling_string) - 1))
1461                 return -EINVAL;
1462
1463         if (copy_from_user(polling_string, buffer, count))
1464                 return -EFAULT;
1465
1466         polling_string[count] = '\0';
1467
1468         seconds = simple_strtoul(polling_string, NULL, 0);
1469
1470         result = acpi_thermal_set_polling(tz, seconds);
1471         if (result)
1472                 return result;
1473
1474         acpi_thermal_check(tz);
1475
1476         return count;
1477 }
1478
1479 static int acpi_thermal_add_fs(struct acpi_device *device)
1480 {
1481         struct proc_dir_entry *entry = NULL;
1482
1483
1484         if (!acpi_device_dir(device)) {
1485                 acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
1486                                                      acpi_thermal_dir);
1487                 if (!acpi_device_dir(device))
1488                         return -ENODEV;
1489                 acpi_device_dir(device)->owner = THIS_MODULE;
1490         }
1491
1492         /* 'state' [R] */
1493         entry = proc_create_data(ACPI_THERMAL_FILE_STATE,
1494                                  S_IRUGO, acpi_device_dir(device),
1495                                  &acpi_thermal_state_fops,
1496                                  acpi_driver_data(device));
1497         if (!entry)
1498                 return -ENODEV;
1499
1500         /* 'temperature' [R] */
1501         entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE,
1502                                  S_IRUGO, acpi_device_dir(device),
1503                                  &acpi_thermal_temp_fops,
1504                                  acpi_driver_data(device));
1505         if (!entry)
1506                 return -ENODEV;
1507
1508         /* 'trip_points' [R] */
1509         entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS,
1510                                  S_IRUGO,
1511                                  acpi_device_dir(device),
1512                                  &acpi_thermal_trip_fops,
1513                                  acpi_driver_data(device));
1514         if (!entry)
1515                 return -ENODEV;
1516
1517         /* 'cooling_mode' [R/W] */
1518         entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE,
1519                                  S_IFREG | S_IRUGO | S_IWUSR,
1520                                  acpi_device_dir(device),
1521                                  &acpi_thermal_cooling_fops,
1522                                  acpi_driver_data(device));
1523         if (!entry)
1524                 return -ENODEV;
1525
1526         /* 'polling_frequency' [R/W] */
1527         entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ,
1528                                  S_IFREG | S_IRUGO | S_IWUSR,
1529                                  acpi_device_dir(device),
1530                                  &acpi_thermal_polling_fops,
1531                                  acpi_driver_data(device));
1532         if (!entry)
1533                 return -ENODEV;
1534         return 0;
1535 }
1536
1537 static int acpi_thermal_remove_fs(struct acpi_device *device)
1538 {
1539
1540         if (acpi_device_dir(device)) {
1541                 remove_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ,
1542                                   acpi_device_dir(device));
1543                 remove_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE,
1544                                   acpi_device_dir(device));
1545                 remove_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
1546                                   acpi_device_dir(device));
1547                 remove_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
1548                                   acpi_device_dir(device));
1549                 remove_proc_entry(ACPI_THERMAL_FILE_STATE,
1550                                   acpi_device_dir(device));
1551                 remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir);
1552                 acpi_device_dir(device) = NULL;
1553         }
1554
1555         return 0;
1556 }
1557
1558 /* --------------------------------------------------------------------------
1559                                  Driver Interface
1560    -------------------------------------------------------------------------- */
1561
1562 static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
1563 {
1564         struct acpi_thermal *tz = data;
1565         struct acpi_device *device = NULL;
1566
1567
1568         if (!tz)
1569                 return;
1570
1571         device = tz->device;
1572
1573         switch (event) {
1574         case ACPI_THERMAL_NOTIFY_TEMPERATURE:
1575                 acpi_thermal_check(tz);
1576                 break;
1577         case ACPI_THERMAL_NOTIFY_THRESHOLDS:
1578                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
1579                 acpi_thermal_check(tz);
1580                 acpi_bus_generate_proc_event(device, event, 0);
1581                 acpi_bus_generate_netlink_event(device->pnp.device_class,
1582                                                   device->dev.bus_id, event, 0);
1583                 break;
1584         case ACPI_THERMAL_NOTIFY_DEVICES:
1585                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
1586                 acpi_thermal_check(tz);
1587                 acpi_bus_generate_proc_event(device, event, 0);
1588                 acpi_bus_generate_netlink_event(device->pnp.device_class,
1589                                                   device->dev.bus_id, event, 0);
1590                 break;
1591         default:
1592                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
1593                                   "Unsupported event [0x%x]\n", event));
1594                 break;
1595         }
1596
1597         return;
1598 }
1599
1600 static int acpi_thermal_get_info(struct acpi_thermal *tz)
1601 {
1602         int result = 0;
1603
1604
1605         if (!tz)
1606                 return -EINVAL;
1607
1608         /* Get temperature [_TMP] (required) */
1609         result = acpi_thermal_get_temperature(tz);
1610         if (result)
1611                 return result;
1612
1613         /* Get trip points [_CRT, _PSV, etc.] (required) */
1614         result = acpi_thermal_get_trip_points(tz);
1615         if (result)
1616                 return result;
1617
1618         /* Set the cooling mode [_SCP] to active cooling (default) */
1619         result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
1620         if (!result)
1621                 tz->flags.cooling_mode = 1;
1622
1623         /* Get default polling frequency [_TZP] (optional) */
1624         if (tzp)
1625                 tz->polling_frequency = tzp;
1626         else
1627                 acpi_thermal_get_polling_frequency(tz);
1628
1629         return 0;
1630 }
1631
1632 static int acpi_thermal_add(struct acpi_device *device)
1633 {
1634         int result = 0;
1635         acpi_status status = AE_OK;
1636         struct acpi_thermal *tz = NULL;
1637
1638
1639         if (!device)
1640                 return -EINVAL;
1641
1642         tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
1643         if (!tz)
1644                 return -ENOMEM;
1645
1646         tz->device = device;
1647         strcpy(tz->name, device->pnp.bus_id);
1648         strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
1649         strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
1650         acpi_driver_data(device) = tz;
1651         mutex_init(&tz->lock);
1652
1653
1654         result = acpi_thermal_get_info(tz);
1655         if (result)
1656                 goto free_memory;
1657
1658         result = acpi_thermal_register_thermal_zone(tz);
1659         if (result)
1660                 goto free_memory;
1661
1662         result = acpi_thermal_add_fs(device);
1663         if (result)
1664                 goto unregister_thermal_zone;
1665
1666         init_timer(&tz->timer);
1667
1668         acpi_thermal_active_off(tz);
1669
1670         acpi_thermal_check(tz);
1671
1672         status = acpi_install_notify_handler(device->handle,
1673                                              ACPI_DEVICE_NOTIFY,
1674                                              acpi_thermal_notify, tz);
1675         if (ACPI_FAILURE(status)) {
1676                 result = -ENODEV;
1677                 goto remove_fs;
1678         }
1679
1680         printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
1681                acpi_device_name(device), acpi_device_bid(device),
1682                KELVIN_TO_CELSIUS(tz->temperature));
1683         goto end;
1684
1685 remove_fs:
1686         acpi_thermal_remove_fs(device);
1687 unregister_thermal_zone:
1688         thermal_zone_device_unregister(tz->thermal_zone);
1689 free_memory:
1690         kfree(tz);
1691 end:
1692         return result;
1693 }
1694
1695 static int acpi_thermal_remove(struct acpi_device *device, int type)
1696 {
1697         acpi_status status = AE_OK;
1698         struct acpi_thermal *tz = NULL;
1699
1700
1701         if (!device || !acpi_driver_data(device))
1702                 return -EINVAL;
1703
1704         tz = acpi_driver_data(device);
1705
1706         /* avoid timer adding new defer task */
1707         tz->zombie = 1;
1708         /* wait for running timer (on other CPUs) finish */
1709         del_timer_sync(&(tz->timer));
1710         /* synchronize deferred task */
1711         acpi_os_wait_events_complete(NULL);
1712         /* deferred task may reinsert timer */
1713         del_timer_sync(&(tz->timer));
1714
1715         status = acpi_remove_notify_handler(device->handle,
1716                                             ACPI_DEVICE_NOTIFY,
1717                                             acpi_thermal_notify);
1718
1719         /* Terminate policy */
1720         if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
1721                 tz->trips.passive.flags.enabled = 0;
1722                 acpi_thermal_passive(tz);
1723         }
1724         if (tz->trips.active[0].flags.valid
1725             && tz->trips.active[0].flags.enabled) {
1726                 tz->trips.active[0].flags.enabled = 0;
1727                 acpi_thermal_active(tz);
1728         }
1729
1730         acpi_thermal_remove_fs(device);
1731         acpi_thermal_unregister_thermal_zone(tz);
1732         mutex_destroy(&tz->lock);
1733         kfree(tz);
1734         return 0;
1735 }
1736
1737 static int acpi_thermal_resume(struct acpi_device *device)
1738 {
1739         struct acpi_thermal *tz = NULL;
1740         int i, j, power_state, result;
1741
1742
1743         if (!device || !acpi_driver_data(device))
1744                 return -EINVAL;
1745
1746         tz = acpi_driver_data(device);
1747
1748         for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
1749                 if (!(&tz->trips.active[i]))
1750                         break;
1751                 if (!tz->trips.active[i].flags.valid)
1752                         break;
1753                 tz->trips.active[i].flags.enabled = 1;
1754                 for (j = 0; j < tz->trips.active[i].devices.count; j++) {
1755                         result = acpi_bus_get_power(tz->trips.active[i].devices.
1756                             handles[j], &power_state);
1757                         if (result || (power_state != ACPI_STATE_D0)) {
1758                                 tz->trips.active[i].flags.enabled = 0;
1759                                 break;
1760                         }
1761                 }
1762                 tz->state.active |= tz->trips.active[i].flags.enabled;
1763         }
1764
1765         acpi_thermal_check(tz);
1766
1767         return AE_OK;
1768 }
1769
1770 static int thermal_act(const struct dmi_system_id *d) {
1771
1772         if (act == 0) {
1773                 printk(KERN_NOTICE "ACPI: %s detected: "
1774                         "disabling all active thermal trip points\n", d->ident);
1775                 act = -1;
1776         }
1777         return 0;
1778 }
1779 static int thermal_nocrt(const struct dmi_system_id *d) {
1780
1781         printk(KERN_NOTICE "ACPI: %s detected: "
1782                 "disabling all critical thermal trip point actions.\n", d->ident);
1783         nocrt = 1;
1784         return 0;
1785 }
1786 static int thermal_tzp(const struct dmi_system_id *d) {
1787
1788         if (tzp == 0) {
1789                 printk(KERN_NOTICE "ACPI: %s detected: "
1790                         "enabling thermal zone polling\n", d->ident);
1791                 tzp = 300;      /* 300 dS = 30 Seconds */
1792         }
1793         return 0;
1794 }
1795 static int thermal_psv(const struct dmi_system_id *d) {
1796
1797         if (psv == 0) {
1798                 printk(KERN_NOTICE "ACPI: %s detected: "
1799                         "disabling all passive thermal trip points\n", d->ident);
1800                 psv = -1;
1801         }
1802         return 0;
1803 }
1804
1805 static struct dmi_system_id thermal_dmi_table[] __initdata = {
1806         /*
1807          * Award BIOS on this AOpen makes thermal control almost worthless.
1808          * http://bugzilla.kernel.org/show_bug.cgi?id=8842
1809          */
1810         {
1811          .callback = thermal_act,
1812          .ident = "AOpen i915GMm-HFS",
1813          .matches = {
1814                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1815                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1816                 },
1817         },
1818         {
1819          .callback = thermal_psv,
1820          .ident = "AOpen i915GMm-HFS",
1821          .matches = {
1822                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1823                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1824                 },
1825         },
1826         {
1827          .callback = thermal_tzp,
1828          .ident = "AOpen i915GMm-HFS",
1829          .matches = {
1830                 DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
1831                 DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
1832                 },
1833         },
1834         {
1835          .callback = thermal_nocrt,
1836          .ident = "Gigabyte GA-7ZX",
1837          .matches = {
1838                 DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
1839                 DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
1840                 },
1841         },
1842         {}
1843 };
1844
1845 static int __init acpi_thermal_init(void)
1846 {
1847         int result = 0;
1848
1849         dmi_check_system(thermal_dmi_table);
1850
1851         if (off) {
1852                 printk(KERN_NOTICE "ACPI: thermal control disabled\n");
1853                 return -ENODEV;
1854         }
1855         acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
1856         if (!acpi_thermal_dir)
1857                 return -ENODEV;
1858         acpi_thermal_dir->owner = THIS_MODULE;
1859
1860         result = acpi_bus_register_driver(&acpi_thermal_driver);
1861         if (result < 0) {
1862                 remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
1863                 return -ENODEV;
1864         }
1865
1866         return 0;
1867 }
1868
1869 static void __exit acpi_thermal_exit(void)
1870 {
1871
1872         acpi_bus_unregister_driver(&acpi_thermal_driver);
1873
1874         remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
1875
1876         return;
1877 }
1878
1879 module_init(acpi_thermal_init);
1880 module_exit(acpi_thermal_exit);