2 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
33 #include <linux/pci.h>
34 #include <linux/poll.h>
35 #include <linux/cdev.h>
36 #include <linux/swap.h>
37 #include <linux/vmalloc.h>
38 #include <asm/pgtable.h>
40 #include "ipath_kernel.h"
41 #include "ips_common.h"
42 #include "ipath_layer.h"
44 static int ipath_open(struct inode *, struct file *);
45 static int ipath_close(struct inode *, struct file *);
46 static ssize_t ipath_write(struct file *, const char __user *, size_t,
48 static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
49 static int ipath_mmap(struct file *, struct vm_area_struct *);
51 static struct file_operations ipath_file_ops = {
55 .release = ipath_close,
60 static int ipath_get_base_info(struct ipath_portdata *pd,
61 void __user *ubase, size_t ubase_size)
64 struct ipath_base_info *kinfo = NULL;
65 struct ipath_devdata *dd = pd->port_dd;
67 if (ubase_size < sizeof(*kinfo)) {
69 "Base size %lu, need %lu (version mismatch?)\n",
70 (unsigned long) ubase_size,
71 (unsigned long) sizeof(*kinfo));
76 kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL);
82 ret = dd->ipath_f_get_base_info(pd, kinfo);
86 kinfo->spi_rcvhdr_cnt = dd->ipath_rcvhdrcnt;
87 kinfo->spi_rcvhdrent_size = dd->ipath_rcvhdrentsize;
88 kinfo->spi_tidegrcnt = dd->ipath_rcvegrcnt;
89 kinfo->spi_rcv_egrbufsize = dd->ipath_rcvegrbufsize;
91 * have to mmap whole thing
93 kinfo->spi_rcv_egrbuftotlen =
94 pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
95 kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk;
96 kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen /
97 pd->port_rcvegrbuf_chunks;
98 kinfo->spi_tidcnt = dd->ipath_rcvtidcnt;
100 * for this use, may be ipath_cfgports summed over all chips that
101 * are are configured and present
103 kinfo->spi_nports = dd->ipath_cfgports;
104 /* unit (chip/board) our port is on */
105 kinfo->spi_unit = dd->ipath_unit;
106 /* for now, only a single page */
107 kinfo->spi_tid_maxsize = PAGE_SIZE;
110 * Doing this per port, and based on the skip value, etc. This has
111 * to be the actual buffer size, since the protocol code treats it
114 * These have to be set to user addresses in the user code via mmap.
115 * These values are used on return to user code for the mmap target
116 * addresses only. For 32 bit, same 44 bit address problem, so use
117 * the physical address, not virtual. Before 2.6.11, using the
118 * page_address() macro worked, but in 2.6.11, even that returns the
119 * full 64 bit address (upper bits all 1's). So far, using the
120 * physical addresses (or chip offsets, for chip mapping) works, but
121 * no doubt some future kernel release will chang that, and we'll be
122 * on to yet another method of dealing with this
124 kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
125 kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
126 kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
127 kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
128 (void *) dd->ipath_statusp -
129 (void *) dd->ipath_pioavailregs_dma;
130 kinfo->spi_piobufbase = (u64) pd->port_piobufs;
131 kinfo->__spi_uregbase =
132 dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
134 kinfo->spi_pioindex = dd->ipath_pbufsport * (pd->port_port - 1);
135 kinfo->spi_piocnt = dd->ipath_pbufsport;
136 kinfo->spi_pioalign = dd->ipath_palign;
138 kinfo->spi_qpair = IPATH_KD_QP;
139 kinfo->spi_piosize = dd->ipath_ibmaxlen;
140 kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
141 kinfo->spi_port = pd->port_port;
142 kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
143 kinfo->spi_hw_version = dd->ipath_revision;
145 if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
154 * ipath_tid_update - update a port TID
156 * @ti: the TID information
158 * The new implementation as of Oct 2004 is that the driver assigns
159 * the tid and returns it to the caller. To make it easier to
160 * catch bugs, and to reduce search time, we keep a cursor for
161 * each port, walking the shadow tid array to find one that's not
164 * For now, if we can't allocate the full list, we fail, although
165 * in the long run, we'll allocate as many as we can, and the
166 * caller will deal with that by trying the remaining pages later.
167 * That means that when we fail, we have to mark the tids as not in
168 * use again, in our shadow copy.
170 * It's up to the caller to free the tids when they are done.
171 * We'll unlock the pages as they free them.
173 * Also, right now we are locking one page at a time, but since
174 * the intended use of this routine is for a single group of
175 * virtually contiguous pages, that should change to improve
178 static int ipath_tid_update(struct ipath_portdata *pd,
179 const struct ipath_tid_info *ti)
182 u32 tid, porttid, cnt, i, tidcnt;
184 struct ipath_devdata *dd = pd->port_dd;
187 u64 __iomem *tidbase;
188 unsigned long tidmap[8];
189 struct page **pagep = NULL;
191 if (!dd->ipath_pageshadow) {
198 ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n",
199 (unsigned long long) ti->tidlist);
201 * Should we treat as success? likely a bug
206 tidcnt = dd->ipath_rcvtidcnt;
208 /* make sure it all fits in port_tid_pg_list */
209 dev_info(&dd->pcidev->dev, "Process tried to allocate %u "
210 "TIDs, only trying max (%u)\n", cnt, tidcnt);
213 pagep = (struct page **)pd->port_tid_pg_list;
214 tidlist = (u16 *) (&pagep[cnt]);
216 memset(tidmap, 0, sizeof(tidmap));
217 tid = pd->port_tidcursor;
218 /* before decrement; chip actual # */
219 porttid = pd->port_port * tidcnt;
221 tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
222 dd->ipath_rcvtidbase +
223 porttid * sizeof(*tidbase));
225 ipath_cdbg(VERBOSE, "Port%u %u tids, cursor %u, tidbase %p\n",
226 pd->port_port, cnt, tid, tidbase);
228 /* virtual address of first page in transfer */
229 vaddr = ti->tidvaddr;
230 if (!access_ok(VERIFY_WRITE, (void __user *) vaddr,
232 ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n",
237 ret = ipath_get_user_pages(vaddr, cnt, pagep);
240 ipath_dbg("Failed to lock addr %p, %u pages "
241 "(already locked)\n",
242 (void *) vaddr, cnt);
244 * for now, continue, and see what happens but with
245 * the new implementation, this should never happen,
246 * unless perhaps the user has mpin'ed the pages
247 * themselves (something we need to test)
251 dev_info(&dd->pcidev->dev,
252 "Failed to lock addr %p, %u pages: "
253 "errno %d\n", (void *) vaddr, cnt, -ret);
257 for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) {
258 for (; ntids--; tid++) {
261 if (!dd->ipath_pageshadow[porttid + tid])
266 * oops, wrapped all the way through their TIDs,
267 * and didn't have enough free; see comments at
270 ipath_dbg("Not enough free TIDs for %u pages "
271 "(index %d), failing\n", cnt, i);
272 i--; /* last tidlist[i] not filled in */
277 ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, "
278 "vaddr %lx\n", i, tid, vaddr);
279 /* we "know" system pages and TID pages are same size */
280 dd->ipath_pageshadow[porttid + tid] = pagep[i];
282 * don't need atomic or it's overhead
284 __set_bit(tid, tidmap);
285 physaddr = page_to_phys(pagep[i]);
286 ipath_stats.sps_pagelocks++;
288 "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
289 tid, vaddr, (unsigned long long) physaddr,
291 dd->ipath_f_put_tid(dd, &tidbase[tid], 1, physaddr);
293 * don't check this tid in ipath_portshadow, since we
294 * just filled it in; start with the next one.
302 /* jump here if copy out of updated info failed... */
303 ipath_dbg("After failure (ret=%d), undo %d of %d entries\n",
305 /* same code that's in ipath_free_tid() */
306 limit = sizeof(tidmap) * BITS_PER_BYTE;
308 /* just in case size changes in future */
310 tid = find_first_bit((const unsigned long *)tidmap, limit);
311 for (; tid < limit; tid++) {
312 if (!test_bit(tid, tidmap))
314 if (dd->ipath_pageshadow[porttid + tid]) {
315 ipath_cdbg(VERBOSE, "Freeing TID %u\n",
317 dd->ipath_f_put_tid(dd, &tidbase[tid], 1,
318 dd->ipath_tidinvalid);
319 dd->ipath_pageshadow[porttid + tid] = NULL;
320 ipath_stats.sps_pageunlocks++;
323 ipath_release_user_pages(pagep, cnt);
326 * Copy the updated array, with ipath_tid's filled in, back
327 * to user. Since we did the copy in already, this "should
328 * never fail" If it does, we have to clean up...
330 if (copy_to_user((void __user *)
331 (unsigned long) ti->tidlist,
332 tidlist, cnt * sizeof(*tidlist))) {
336 if (copy_to_user((void __user *) (unsigned long) ti->tidmap,
337 tidmap, sizeof tidmap)) {
343 pd->port_tidcursor = tid;
348 ipath_dbg("Failed to map %u TID pages, failing with %d\n",
354 * ipath_tid_free - free a port TID
358 * right now we are unlocking one page at a time, but since
359 * the intended use of this routine is for a single group of
360 * virtually contiguous pages, that should change to improve
361 * performance. We check that the TID is in range for this port
362 * but otherwise don't check validity; if user has an error and
363 * frees the wrong tid, it's only their own data that can thereby
364 * be corrupted. We do check that the TID was in use, for sanity
365 * We always use our idea of the saved address, not the address that
366 * they pass in to us.
369 static int ipath_tid_free(struct ipath_portdata *pd,
370 const struct ipath_tid_info *ti)
373 u32 tid, porttid, cnt, limit, tidcnt;
374 struct ipath_devdata *dd = pd->port_dd;
375 u64 __iomem *tidbase;
376 unsigned long tidmap[8];
378 if (!dd->ipath_pageshadow) {
383 if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap,
389 porttid = pd->port_port * dd->ipath_rcvtidcnt;
390 tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
391 dd->ipath_rcvtidbase +
392 porttid * sizeof(*tidbase));
394 tidcnt = dd->ipath_rcvtidcnt;
395 limit = sizeof(tidmap) * BITS_PER_BYTE;
397 /* just in case size changes in future */
399 tid = find_first_bit(tidmap, limit);
400 ipath_cdbg(VERBOSE, "Port%u free %u tids; first bit (max=%d) "
401 "set is %d, porttid %u\n", pd->port_port, ti->tidcnt,
402 limit, tid, porttid);
403 for (cnt = 0; tid < limit; tid++) {
405 * small optimization; if we detect a run of 3 or so without
406 * any set, use find_first_bit again. That's mainly to
407 * accelerate the case where we wrapped, so we have some at
408 * the beginning, and some at the end, and a big gap
411 if (!test_bit(tid, tidmap))
414 if (dd->ipath_pageshadow[porttid + tid]) {
415 ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
417 dd->ipath_f_put_tid(dd, &tidbase[tid], 1,
418 dd->ipath_tidinvalid);
419 ipath_release_user_pages(
420 &dd->ipath_pageshadow[porttid + tid], 1);
421 dd->ipath_pageshadow[porttid + tid] = NULL;
422 ipath_stats.sps_pageunlocks++;
424 ipath_dbg("Unused tid %u, ignoring\n", tid);
426 if (cnt != ti->tidcnt)
427 ipath_dbg("passed in tidcnt %d, only %d bits set in map\n",
431 ipath_dbg("Failed to unmap %u TID pages, failing with %d\n",
437 * ipath_set_part_key - set a partition key
441 * We can have up to 4 active at a time (other than the default, which is
442 * always allowed). This is somewhat tricky, since multiple ports may set
443 * the same key, so we reference count them, and clean up at exit. All 4
444 * partition keys are packed into a single infinipath register. It's an
445 * error for a process to set the same pkey multiple times. We provide no
446 * mechanism to de-allocate a pkey at this time, we may eventually need to
447 * do that. I've used the atomic operations, and no locking, and only make
448 * a single pass through what's available. This should be more than
449 * adequate for some time. I'll think about spinlocks or the like if and as
452 static int ipath_set_part_key(struct ipath_portdata *pd, u16 key)
454 struct ipath_devdata *dd = pd->port_dd;
455 int i, any = 0, pidx = -1;
456 u16 lkey = key & 0x7FFF;
459 if (lkey == (IPS_DEFAULT_P_KEY & 0x7FFF)) {
460 /* nothing to do; this key always valid */
465 ipath_cdbg(VERBOSE, "p%u try to set pkey %hx, current keys "
466 "%hx:%x %hx:%x %hx:%x %hx:%x\n",
467 pd->port_port, key, dd->ipath_pkeys[0],
468 atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1],
469 atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2],
470 atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3],
471 atomic_read(&dd->ipath_pkeyrefs[3]));
474 ipath_cdbg(PROC, "p%u tries to set key 0, not allowed\n",
481 * Set the full membership bit, because it has to be
482 * set in the register or the packet, and it seems
483 * cleaner to set in the register than to force all
484 * callers to set it. (see bug 4331)
488 for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
489 if (!pd->port_pkeys[i] && pidx == -1)
491 if (pd->port_pkeys[i] == key) {
492 ipath_cdbg(VERBOSE, "p%u tries to set same pkey "
493 "(%x) more than once\n",
500 ipath_dbg("All pkeys for port %u already in use, "
501 "can't set %x\n", pd->port_port, key);
505 for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
506 if (!dd->ipath_pkeys[i]) {
510 if (dd->ipath_pkeys[i] == key) {
511 atomic_t *pkrefs = &dd->ipath_pkeyrefs[i];
513 if (atomic_inc_return(pkrefs) > 1) {
514 pd->port_pkeys[pidx] = key;
515 ipath_cdbg(VERBOSE, "p%u set key %x "
516 "matches #%d, count now %d\n",
517 pd->port_port, key, i,
518 atomic_read(pkrefs));
523 * lost race, decrement count, catch below
526 ipath_cdbg(VERBOSE, "Lost race, count was "
527 "0, after dec, it's %d\n",
528 atomic_read(pkrefs));
532 if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
534 * It makes no sense to have both the limited and
535 * full membership PKEY set at the same time since
536 * the unlimited one will disable the limited one.
543 ipath_dbg("port %u, all pkeys already in use, "
544 "can't set %x\n", pd->port_port, key);
548 for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
549 if (!dd->ipath_pkeys[i] &&
550 atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
553 /* for ipathstats, etc. */
554 ipath_stats.sps_pkeys[i] = lkey;
555 pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key;
557 (u64) dd->ipath_pkeys[0] |
558 ((u64) dd->ipath_pkeys[1] << 16) |
559 ((u64) dd->ipath_pkeys[2] << 32) |
560 ((u64) dd->ipath_pkeys[3] << 48);
561 ipath_cdbg(PROC, "p%u set key %x in #%d, "
562 "portidx %d, new pkey reg %llx\n",
563 pd->port_port, key, i, pidx,
564 (unsigned long long) pkey);
566 dd, dd->ipath_kregs->kr_partitionkey, pkey);
572 ipath_dbg("port %u, all pkeys already in use 2nd pass, "
573 "can't set %x\n", pd->port_port, key);
581 * ipath_manage_rcvq - manage a port's receive queue
583 * @start_stop: action to carry out
585 * start_stop == 0 disables receive on the port, for use in queue
586 * overflow conditions. start_stop==1 re-enables, to be used to
587 * re-init the software copy of the head register
589 static int ipath_manage_rcvq(struct ipath_portdata *pd, int start_stop)
591 struct ipath_devdata *dd = pd->port_dd;
594 ipath_cdbg(PROC, "%sabling rcv for unit %u port %u\n",
595 start_stop ? "en" : "dis", dd->ipath_unit,
597 /* atomically clear receive enable port. */
600 * On enable, force in-memory copy of the tail register to
601 * 0, so that protocol code doesn't have to worry about
602 * whether or not the chip has yet updated the in-memory
603 * copy or not on return from the system call. The chip
604 * always resets it's tail register back to 0 on a
605 * transition from disabled to enabled. This could cause a
606 * problem if software was broken, and did the enable w/o
607 * the disable, but eventually the in-memory copy will be
608 * updated and correct itself, even in the face of software
611 *pd->port_rcvhdrtail_kvaddr = 0;
612 set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
615 clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
617 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
619 /* now be sure chip saw it before we return */
620 tval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
623 * And try to be sure that tail reg update has happened too.
624 * This should in theory interlock with the RXE changes to
625 * the tail register. Don't assign it to the tail register
626 * in memory copy, since we could overwrite an update by the
629 tval = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
631 /* always; new head should be equal to new tail; see above */
635 static void ipath_clean_part_key(struct ipath_portdata *pd,
636 struct ipath_devdata *dd)
638 int i, j, pchanged = 0;
641 /* for debugging only */
642 oldpkey = (u64) dd->ipath_pkeys[0] |
643 ((u64) dd->ipath_pkeys[1] << 16) |
644 ((u64) dd->ipath_pkeys[2] << 32) |
645 ((u64) dd->ipath_pkeys[3] << 48);
647 for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
648 if (!pd->port_pkeys[i])
650 ipath_cdbg(VERBOSE, "look for key[%d] %hx in pkeys\n", i,
652 for (j = 0; j < ARRAY_SIZE(dd->ipath_pkeys); j++) {
653 /* check for match independent of the global bit */
654 if ((dd->ipath_pkeys[j] & 0x7fff) !=
655 (pd->port_pkeys[i] & 0x7fff))
657 if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) {
658 ipath_cdbg(VERBOSE, "p%u clear key "
661 pd->port_pkeys[i], j);
662 ipath_stats.sps_pkeys[j] =
663 dd->ipath_pkeys[j] = 0;
667 VERBOSE, "p%u key %x matches #%d, "
668 "but ref still %d\n", pd->port_port,
669 pd->port_pkeys[i], j,
670 atomic_read(&dd->ipath_pkeyrefs[j]));
673 pd->port_pkeys[i] = 0;
676 u64 pkey = (u64) dd->ipath_pkeys[0] |
677 ((u64) dd->ipath_pkeys[1] << 16) |
678 ((u64) dd->ipath_pkeys[2] << 32) |
679 ((u64) dd->ipath_pkeys[3] << 48);
680 ipath_cdbg(VERBOSE, "p%u old pkey reg %llx, "
681 "new pkey reg %llx\n", pd->port_port,
682 (unsigned long long) oldpkey,
683 (unsigned long long) pkey);
684 ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
690 * ipath_create_user_egr - allocate eager TID buffers
691 * @pd: the port to allocate TID buffers for
693 * This routine is now quite different for user and kernel, because
694 * the kernel uses skb's, for the accelerated network performance
695 * This is the user port version
697 * Allocate the eager TID buffers and program them into infinipath
698 * They are no longer completely contiguous, we do multiple allocation
701 static int ipath_create_user_egr(struct ipath_portdata *pd)
703 struct ipath_devdata *dd = pd->port_dd;
704 unsigned e, egrcnt, alloced, egrperchunk, chunk, egrsize, egroff;
708 egrcnt = dd->ipath_rcvegrcnt;
709 /* TID number offset for this port */
710 egroff = pd->port_port * egrcnt;
711 egrsize = dd->ipath_rcvegrbufsize;
712 ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid "
713 "offset %x, egrsize %u\n", egrcnt, egroff, egrsize);
716 * to avoid wasting a lot of memory, we allocate 32KB chunks of
717 * physically contiguous memory, advance through it until used up
718 * and then allocate more. Of course, we need memory to store those
719 * extra pointers, now. Started out with 256KB, but under heavy
720 * memory pressure (creating large files and then copying them over
721 * NFS while doing lots of MPI jobs), we hit some allocation
722 * failures, even though we can sleep... (2.6.10) Still get
723 * failures at 64K. 32K is the lowest we can go without waiting
724 * more memory again. It seems likely that the coalescing in
725 * free_pages, etc. still has issues (as it has had previously
726 * during 2.6.x development).
729 alloced = ALIGN(egrsize * egrcnt, size);
730 egrperchunk = size / egrsize;
731 chunk = (egrcnt + egrperchunk - 1) / egrperchunk;
732 pd->port_rcvegrbuf_chunks = chunk;
733 pd->port_rcvegrbufs_perchunk = egrperchunk;
734 pd->port_rcvegrbuf_size = size;
735 pd->port_rcvegrbuf = vmalloc(chunk * sizeof(pd->port_rcvegrbuf[0]));
736 if (!pd->port_rcvegrbuf) {
740 pd->port_rcvegrbuf_phys =
741 vmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0]));
742 if (!pd->port_rcvegrbuf_phys) {
746 for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
748 * GFP_USER, but without GFP_FS, so buffer cache can be
749 * coalesced (we hope); otherwise, even at order 4,
750 * heavy filesystem activity makes these fail
752 gfp_t gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
754 pd->port_rcvegrbuf[e] = dma_alloc_coherent(
755 &dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e],
758 if (!pd->port_rcvegrbuf[e]) {
760 goto bail_rcvegrbuf_phys;
764 pd->port_rcvegr_phys = pd->port_rcvegrbuf_phys[0];
766 for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) {
767 dma_addr_t pa = pd->port_rcvegrbuf_phys[chunk];
770 for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
771 dd->ipath_f_put_tid(dd, e + egroff +
775 dd->ipath_rcvegrbase), 0, pa);
778 cond_resched(); /* don't hog the cpu */
785 for (e = 0; e < pd->port_rcvegrbuf_chunks &&
786 pd->port_rcvegrbuf[e]; e++)
787 dma_free_coherent(&dd->pcidev->dev, size,
788 pd->port_rcvegrbuf[e],
789 pd->port_rcvegrbuf_phys[e]);
791 vfree(pd->port_rcvegrbuf_phys);
792 pd->port_rcvegrbuf_phys = NULL;
794 vfree(pd->port_rcvegrbuf);
795 pd->port_rcvegrbuf = NULL;
800 static int ipath_do_user_init(struct ipath_portdata *pd,
801 const struct ipath_user_info *uinfo)
804 struct ipath_devdata *dd = pd->port_dd;
805 u64 physaddr, uaddr, off, atmp;
810 /* for now, if major version is different, bail */
811 if ((uinfo->spu_userversion >> 16) != IPATH_USER_SWMAJOR) {
812 dev_info(&dd->pcidev->dev,
813 "User major version %d not same as driver "
814 "major %d\n", uinfo->spu_userversion >> 16,
820 if ((uinfo->spu_userversion & 0xffff) != IPATH_USER_SWMINOR)
821 ipath_dbg("User minor version %d not same as driver "
822 "minor %d\n", uinfo->spu_userversion & 0xffff,
825 if (uinfo->spu_rcvhdrsize) {
826 ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
831 /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
833 /* set up for the rcvhdr Q tail register writeback to user memory */
834 if (!uinfo->spu_rcvhdraddr ||
835 !access_ok(VERIFY_WRITE, (u64 __user *) (unsigned long)
836 uinfo->spu_rcvhdraddr, sizeof(u64))) {
837 ipath_dbg("Port %d rcvhdrtail addr %llx not valid\n",
839 (unsigned long long) uinfo->spu_rcvhdraddr);
844 off = offset_in_page(uinfo->spu_rcvhdraddr);
845 uaddr = PAGE_MASK & (unsigned long) uinfo->spu_rcvhdraddr;
846 ret = ipath_get_user_pages_nocopy(uaddr, &pagep);
848 dev_info(&dd->pcidev->dev, "Failed to lookup and lock "
849 "address %llx for rcvhdrtail: errno %d\n",
850 (unsigned long long) uinfo->spu_rcvhdraddr, -ret);
853 ipath_stats.sps_pagelocks++;
854 pd->port_rcvhdrtail_uaddr = uaddr;
855 pd->port_rcvhdrtail_pagep = pagep;
856 pd->port_rcvhdrtail_kvaddr =
858 pd->port_rcvhdrtail_kvaddr += off;
859 physaddr = page_to_phys(pagep) + off;
860 ipath_cdbg(VERBOSE, "port %d user addr %llx hdrtailaddr, %llx "
861 "physical (off=%llx)\n",
863 (unsigned long long) uinfo->spu_rcvhdraddr,
864 (unsigned long long) physaddr, (unsigned long long) off);
865 ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
866 pd->port_port, physaddr);
867 atmp = ipath_read_kreg64_port(dd,
868 dd->ipath_kregs->kr_rcvhdrtailaddr,
870 if (physaddr != atmp) {
872 "Catastrophic software error, "
873 "RcvHdrTailAddr%u written as %llx, "
874 "read back as %llx\n", pd->port_port,
875 (unsigned long long) physaddr,
876 (unsigned long long) atmp);
881 /* for right now, kernel piobufs are at end, so port 1 is at 0 */
882 pd->port_piobufs = dd->ipath_piobufbase +
883 dd->ipath_pbufsport * (pd->port_port -
884 1) * dd->ipath_palign;
885 ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n",
886 pd->port_port, pd->port_piobufs);
889 * Now allocate the rcvhdr Q and eager TIDs; skip the TID
890 * array for time being. If pd->port_port > chip-supported,
891 * we need to do extra stuff here to handle by handling overflow
892 * through port 0, someday
894 ret = ipath_create_rcvhdrq(dd, pd);
896 ret = ipath_create_user_egr(pd);
899 /* enable receives now */
900 /* atomically set enable bit for this port */
901 set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
905 * set the head registers for this port to the current values
906 * of the tail pointers, since we don't know if they were
907 * updated on last use of the port.
909 head32 = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
911 ipath_write_ureg(dd, ur_rcvhdrhead, head, pd->port_port);
912 head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
913 ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
914 dd->ipath_lastegrheads[pd->port_port] = -1;
915 dd->ipath_lastrcvhdrqtails[pd->port_port] = -1;
916 ipath_cdbg(VERBOSE, "Wrote port%d head %llx, egrhead %x from "
917 "tail regs\n", pd->port_port,
918 (unsigned long long) head, head32);
919 pd->port_tidcursor = 0; /* start at beginning after open */
921 * now enable the port; the tail registers will be written to memory
922 * by the chip as soon as it sees the write to
923 * dd->ipath_kregs->kr_rcvctrl. The update only happens on
924 * transition from 0 to 1, so clear it first, then set it as part of
925 * enabling the port. This will (very briefly) affect any other
926 * open ports, but it shouldn't be long enough to be an issue.
928 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
929 dd->ipath_rcvctrl & ~INFINIPATH_R_TAILUPD);
930 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
937 static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd,
943 /* it's the real hardware, so io_remap works */
945 if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
946 dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen "
947 "%lx > PAGE\n", vma->vm_end - vma->vm_start);
950 phys = dd->ipath_physaddr + ureg;
951 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
953 vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
954 ret = io_remap_pfn_range(vma, vma->vm_start,
956 vma->vm_end - vma->vm_start,
962 static int mmap_piobufs(struct vm_area_struct *vma,
963 struct ipath_devdata *dd,
964 struct ipath_portdata *pd)
970 * When we map the PIO buffers, we want to map them as writeonly, no
974 if ((vma->vm_end - vma->vm_start) >
975 (dd->ipath_pbufsport * dd->ipath_palign)) {
976 dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
977 "reqlen %lx > PAGE\n",
978 vma->vm_end - vma->vm_start);
983 phys = dd->ipath_physaddr + pd->port_piobufs;
985 * Do *NOT* mark this as non-cached (PWT bit), or we don't get the
986 * write combining behavior we want on the PIO buffers!
987 * vma->vm_page_prot =
988 * pgprot_noncached(vma->vm_page_prot);
991 if (vma->vm_flags & VM_READ) {
992 dev_info(&dd->pcidev->dev,
993 "Can't map piobufs as readable (flags=%lx)\n",
999 /* don't allow them to later change to readable with mprotect */
1001 vma->vm_flags &= ~VM_MAYWRITE;
1002 vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
1004 ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
1005 vma->vm_end - vma->vm_start,
1011 static int mmap_rcvegrbufs(struct vm_area_struct *vma,
1012 struct ipath_portdata *pd)
1014 struct ipath_devdata *dd = pd->port_dd;
1015 unsigned long start, size;
1016 size_t total_size, i;
1020 if (!pd->port_rcvegrbuf) {
1025 size = pd->port_rcvegrbuf_size;
1026 total_size = pd->port_rcvegrbuf_chunks * size;
1027 if ((vma->vm_end - vma->vm_start) > total_size) {
1028 dev_info(&dd->pcidev->dev, "FAIL on egr bufs: "
1029 "reqlen %lx > actual %lx\n",
1030 vma->vm_end - vma->vm_start,
1031 (unsigned long) total_size);
1036 if (vma->vm_flags & VM_WRITE) {
1037 dev_info(&dd->pcidev->dev, "Can't map eager buffers as "
1038 "writable (flags=%lx)\n", vma->vm_flags);
1043 start = vma->vm_start;
1044 phys = pd->port_rcvegrbuf_phys;
1046 /* don't allow them to later change to writeable with mprotect */
1047 vma->vm_flags &= ~VM_MAYWRITE;
1049 for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) {
1050 ret = remap_pfn_range(vma, start, phys[i] >> PAGE_SHIFT,
1051 size, vma->vm_page_prot);
1061 static int mmap_rcvhdrq(struct vm_area_struct *vma,
1062 struct ipath_portdata *pd)
1064 struct ipath_devdata *dd = pd->port_dd;
1069 * kmalloc'ed memory, physically contiguous; this is from
1070 * spi_rcvhdr_base; we allow user to map read-write so they can
1071 * write hdrq entries to allow protocol code to directly poll
1072 * whether a hdrq entry has been written.
1074 total_size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
1075 sizeof(u32), PAGE_SIZE);
1076 if ((vma->vm_end - vma->vm_start) > total_size) {
1077 dev_info(&dd->pcidev->dev,
1078 "FAIL on rcvhdrq: reqlen %lx > actual %lx\n",
1079 vma->vm_end - vma->vm_start,
1080 (unsigned long) total_size);
1085 ret = remap_pfn_range(vma, vma->vm_start,
1086 pd->port_rcvhdrq_phys >> PAGE_SHIFT,
1087 vma->vm_end - vma->vm_start,
1093 static int mmap_pioavailregs(struct vm_area_struct *vma,
1094 struct ipath_portdata *pd)
1096 struct ipath_devdata *dd = pd->port_dd;
1100 * when we map the PIO bufferavail registers, we want to map them as
1101 * readonly, no write possible.
1103 * kmalloc'ed memory, physically contiguous, one page only, readonly
1106 if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
1107 dev_info(&dd->pcidev->dev, "FAIL on pioavailregs_dma: "
1108 "reqlen %lx > actual %lx\n",
1109 vma->vm_end - vma->vm_start,
1110 (unsigned long) PAGE_SIZE);
1115 if (vma->vm_flags & VM_WRITE) {
1116 dev_info(&dd->pcidev->dev,
1117 "Can't map pioavailregs as writable (flags=%lx)\n",
1123 /* don't allow them to later change with mprotect */
1124 vma->vm_flags &= ~VM_MAYWRITE;
1126 ret = remap_pfn_range(vma, vma->vm_start,
1127 dd->ipath_pioavailregs_phys >> PAGE_SHIFT,
1128 PAGE_SIZE, vma->vm_page_prot);
1134 * ipath_mmap - mmap various structures into user space
1135 * @fp: the file pointer
1138 * We use this to have a shared buffer between the kernel and the user code
1139 * for the rcvhdr queue, egr buffers, and the per-port user regs and pio
1140 * buffers in the chip. We have the open and close entries so we can bump
1141 * the ref count and keep the driver from being unloaded while still mapped.
1143 static int ipath_mmap(struct file *fp, struct vm_area_struct *vma)
1145 struct ipath_portdata *pd;
1146 struct ipath_devdata *dd;
1153 * This is the ipath_do_user_init() code, mapping the shared buffers
1154 * into the user process. The address referred to by vm_pgoff is the
1155 * virtual, not physical, address; we only do one mmap for each
1158 pgaddr = vma->vm_pgoff << PAGE_SHIFT;
1161 * note that ureg does *NOT* have the kregvirt as part of it, to be
1162 * sure that for 32 bit programs, we don't end up trying to map a >
1163 * 44 address. Has to match ipath_get_base_info() code that sets
1167 ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
1169 ipath_cdbg(MM, "ushare: pgaddr %llx vm_start=%lx, vmlen %lx\n",
1170 (unsigned long long) pgaddr, vma->vm_start,
1171 vma->vm_end - vma->vm_start);
1174 ret = mmap_ureg(vma, dd, ureg);
1175 else if (pgaddr == pd->port_piobufs)
1176 ret = mmap_piobufs(vma, dd, pd);
1177 else if (pgaddr == (u64) pd->port_rcvegr_phys)
1178 ret = mmap_rcvegrbufs(vma, pd);
1179 else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
1180 ret = mmap_rcvhdrq(vma, pd);
1181 else if (pgaddr == dd->ipath_pioavailregs_phys)
1182 ret = mmap_pioavailregs(vma, pd);
1186 vma->vm_private_data = NULL;
1189 dev_info(&dd->pcidev->dev,
1190 "Failure %d on addr %lx, off %lx\n",
1191 -ret, vma->vm_start, vma->vm_pgoff);
1196 static unsigned int ipath_poll(struct file *fp,
1197 struct poll_table_struct *pt)
1199 struct ipath_portdata *pd;
1202 struct ipath_devdata *dd;
1207 bit = pd->port_port + INFINIPATH_R_INTRAVAIL_SHIFT;
1208 set_bit(bit, &dd->ipath_rcvctrl);
1211 * Before blocking, make sure that head is still == tail,
1212 * reading from the chip, so we can be sure the interrupt
1213 * enable has made it to the chip. If not equal, disable
1214 * interrupt again and return immediately. This avoids races,
1215 * and the overhead of the chip read doesn't matter much at
1216 * this point, since we are waiting for something anyway.
1219 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
1222 head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port);
1223 tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
1226 set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
1227 if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
1228 (void)ipath_write_ureg(dd, ur_rcvhdrhead,
1229 dd->ipath_rhdrhead_intr_off
1230 | head, pd->port_port);
1231 poll_wait(fp, &pd->port_wait, pt);
1233 if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {
1234 /* timed out, no packets received */
1235 clear_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
1236 pd->port_rcvwait_to++;
1240 /* it's already happened; don't do wait_event overhead */
1241 pd->port_rcvnowait++;
1244 clear_bit(bit, &dd->ipath_rcvctrl);
1245 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
1251 static int try_alloc_port(struct ipath_devdata *dd, int port,
1256 if (!dd->ipath_pd[port]) {
1259 p = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);
1262 * Allocate memory for use in ipath_tid_update() just once
1263 * at open, not per call. Reduces cost of expected send
1266 ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) +
1267 dd->ipath_rcvtidcnt * sizeof(struct page **),
1270 ipath_dev_err(dd, "Unable to allocate portdata "
1271 "memory, failing open\n");
1277 dd->ipath_pd[port] = p;
1278 dd->ipath_pd[port]->port_port = port;
1279 dd->ipath_pd[port]->port_dd = dd;
1280 dd->ipath_pd[port]->port_tid_pg_list = ptmp;
1281 init_waitqueue_head(&dd->ipath_pd[port]->port_wait);
1283 if (!dd->ipath_pd[port]->port_cnt) {
1284 dd->ipath_pd[port]->port_cnt = 1;
1285 fp->private_data = (void *) dd->ipath_pd[port];
1286 ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n",
1287 current->comm, current->pid, dd->ipath_unit,
1289 dd->ipath_pd[port]->port_pid = current->pid;
1290 strncpy(dd->ipath_pd[port]->port_comm, current->comm,
1291 sizeof(dd->ipath_pd[port]->port_comm));
1292 ipath_stats.sps_ports++;
1302 static inline int usable(struct ipath_devdata *dd)
1305 (dd->ipath_flags & IPATH_PRESENT) &&
1306 dd->ipath_kregbase &&
1308 !(dd->ipath_flags & (IPATH_LINKDOWN | IPATH_DISABLED
1312 static int find_free_port(int unit, struct file *fp)
1314 struct ipath_devdata *dd = ipath_lookup(unit);
1327 for (i = 0; i < dd->ipath_cfgports; i++) {
1328 ret = try_alloc_port(dd, i, fp);
1338 static int find_best_unit(struct file *fp)
1340 int ret = 0, i, prefunit = -1, devmax;
1341 int maxofallports, npresent, nup;
1344 (void) ipath_count_units(&npresent, &nup, &maxofallports);
1347 * This code is present to allow a knowledgeable person to
1348 * specify the layout of processes to processors before opening
1349 * this driver, and then we'll assign the process to the "closest"
1350 * HT-400 to that processor (we assume reasonable connectivity,
1351 * for now). This code assumes that if affinity has been set
1352 * before this point, that at most one cpu is set; for now this
1353 * is reasonable. I check for both cpus_empty() and cpus_full(),
1354 * in case some kernel variant sets none of the bits when no
1355 * affinity is set. 2.6.11 and 12 kernels have all present
1356 * cpus set. Some day we'll have to fix it up further to handle
1357 * a cpu subset. This algorithm fails for two HT-400's connected
1358 * in tunnel fashion. Eventually this needs real topology
1359 * information. There may be some issues with dual core numbering
1360 * as well. This needs more work prior to release.
1362 if (!cpus_empty(current->cpus_allowed) &&
1363 !cpus_full(current->cpus_allowed)) {
1364 int ncpus = num_online_cpus(), curcpu = -1;
1365 for (i = 0; i < ncpus; i++)
1366 if (cpu_isset(i, current->cpus_allowed)) {
1367 ipath_cdbg(PROC, "%s[%u] affinity set for "
1368 "cpu %d\n", current->comm,
1374 prefunit = curcpu / (ncpus / npresent);
1375 ipath_dbg("%s[%u] %d chips, %d cpus, "
1376 "%d cpus/chip, select unit %d\n",
1377 current->comm, current->pid,
1378 npresent, ncpus, ncpus / npresent,
1385 * user ports start at 1, kernel port is 0
1386 * For now, we do round-robin access across all chips
1390 devmax = prefunit + 1;
1392 devmax = ipath_count_units(NULL, NULL, NULL);
1394 for (i = 1; i < maxofallports; i++) {
1395 for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax;
1397 struct ipath_devdata *dd = ipath_lookup(ndev);
1400 continue; /* can't use this unit */
1401 if (i >= dd->ipath_cfgports)
1403 * Maxed out on users of this unit. Try
1407 ret = try_alloc_port(dd, i, fp);
1416 ipath_dbg("No ports available (none initialized "
1420 /* if started above 0, retry from 0 */
1422 "%s[%u] no ports on prefunit "
1423 "%d, clear and re-check\n",
1424 current->comm, current->pid,
1426 devmax = ipath_count_units(NULL, NULL,
1432 ipath_dbg("No ports available\n");
1436 ipath_dbg("No boards found\n");
1443 static int ipath_open(struct inode *in, struct file *fp)
1447 mutex_lock(&ipath_mutex);
1450 ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
1451 (long)in->i_rdev, minor);
1454 ret = find_free_port(minor - 1, fp);
1456 ret = find_best_unit(fp);
1458 mutex_unlock(&ipath_mutex);
1463 * unlock_exptid - unlock any expected TID entries port still had in use
1466 * We don't actually update the chip here, because we do a bulk update
1467 * below, using ipath_f_clear_tids.
1469 static void unlock_expected_tids(struct ipath_portdata *pd)
1471 struct ipath_devdata *dd = pd->port_dd;
1472 int port_tidbase = pd->port_port * dd->ipath_rcvtidcnt;
1473 int i, cnt = 0, maxtid = port_tidbase + dd->ipath_rcvtidcnt;
1475 ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n",
1477 for (i = port_tidbase; i < maxtid; i++) {
1478 if (!dd->ipath_pageshadow[i])
1481 ipath_release_user_pages_on_close(&dd->ipath_pageshadow[i],
1483 dd->ipath_pageshadow[i] = NULL;
1485 ipath_stats.sps_pageunlocks++;
1488 ipath_cdbg(VERBOSE, "Port %u locked %u expTID entries\n",
1489 pd->port_port, cnt);
1491 if (ipath_stats.sps_pagelocks || ipath_stats.sps_pageunlocks)
1492 ipath_cdbg(VERBOSE, "%llu pages locked, %llu unlocked\n",
1493 (unsigned long long) ipath_stats.sps_pagelocks,
1494 (unsigned long long)
1495 ipath_stats.sps_pageunlocks);
1498 static int ipath_close(struct inode *in, struct file *fp)
1501 struct ipath_portdata *pd;
1502 struct ipath_devdata *dd;
1505 ipath_cdbg(VERBOSE, "close on dev %lx, private data %p\n",
1506 (long)in->i_rdev, fp->private_data);
1508 mutex_lock(&ipath_mutex);
1511 port = pd->port_port;
1512 fp->private_data = NULL;
1515 if (pd->port_hdrqfull) {
1516 ipath_cdbg(PROC, "%s[%u] had %u rcvhdrqfull errors "
1517 "during run\n", pd->port_comm, pd->port_pid,
1519 pd->port_hdrqfull = 0;
1522 if (pd->port_rcvwait_to || pd->port_piowait_to
1523 || pd->port_rcvnowait || pd->port_pionowait) {
1524 ipath_cdbg(VERBOSE, "port%u, %u rcv, %u pio wait timeo; "
1525 "%u rcv %u, pio already\n",
1526 pd->port_port, pd->port_rcvwait_to,
1527 pd->port_piowait_to, pd->port_rcvnowait,
1528 pd->port_pionowait);
1529 pd->port_rcvwait_to = pd->port_piowait_to =
1530 pd->port_rcvnowait = pd->port_pionowait = 0;
1532 if (pd->port_flag) {
1533 ipath_dbg("port %u port_flag still set to 0x%lx\n",
1534 pd->port_port, pd->port_flag);
1538 if (dd->ipath_kregbase) {
1539 if (pd->port_rcvhdrtail_uaddr) {
1540 pd->port_rcvhdrtail_uaddr = 0;
1541 pd->port_rcvhdrtail_kvaddr = NULL;
1542 ipath_release_user_pages_on_close(
1543 &pd->port_rcvhdrtail_pagep, 1);
1544 pd->port_rcvhdrtail_pagep = NULL;
1545 ipath_stats.sps_pageunlocks++;
1547 ipath_write_kreg_port(
1548 dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
1550 ipath_write_kreg_port(
1551 dd, dd->ipath_kregs->kr_rcvhdraddr,
1554 /* clean up the pkeys for this port user */
1555 ipath_clean_part_key(pd, dd);
1557 if (port < dd->ipath_cfgports) {
1558 int i = dd->ipath_pbufsport * (port - 1);
1559 ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
1561 /* atomically clear receive enable port. */
1562 clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port,
1563 &dd->ipath_rcvctrl);
1566 dd->ipath_kregs->kr_rcvctrl,
1569 if (dd->ipath_pageshadow)
1570 unlock_expected_tids(pd);
1571 ipath_stats.sps_ports--;
1572 ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
1573 pd->port_comm, pd->port_pid,
1574 dd->ipath_unit, port);
1581 dd->ipath_f_clear_tids(dd, pd->port_port);
1583 ipath_free_pddata(dd, pd->port_port, 0);
1585 mutex_unlock(&ipath_mutex);
1590 static int ipath_port_info(struct ipath_portdata *pd,
1591 struct ipath_port_info __user *uinfo)
1593 struct ipath_port_info info;
1597 (void) ipath_count_units(NULL, &nup, NULL);
1598 info.num_active = nup;
1599 info.unit = pd->port_dd->ipath_unit;
1600 info.port = pd->port_port;
1602 if (copy_to_user(uinfo, &info, sizeof(info))) {
1612 static ssize_t ipath_write(struct file *fp, const char __user *data,
1613 size_t count, loff_t *off)
1615 const struct ipath_cmd __user *ucmd;
1616 struct ipath_portdata *pd;
1617 const void __user *src;
1618 size_t consumed, copy;
1619 struct ipath_cmd cmd;
1623 if (count < sizeof(cmd.type)) {
1628 ucmd = (const struct ipath_cmd __user *) data;
1630 if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) {
1635 consumed = sizeof(cmd.type);
1638 case IPATH_CMD_USER_INIT:
1639 copy = sizeof(cmd.cmd.user_info);
1640 dest = &cmd.cmd.user_info;
1641 src = &ucmd->cmd.user_info;
1643 case IPATH_CMD_RECV_CTRL:
1644 copy = sizeof(cmd.cmd.recv_ctrl);
1645 dest = &cmd.cmd.recv_ctrl;
1646 src = &ucmd->cmd.recv_ctrl;
1648 case IPATH_CMD_PORT_INFO:
1649 copy = sizeof(cmd.cmd.port_info);
1650 dest = &cmd.cmd.port_info;
1651 src = &ucmd->cmd.port_info;
1653 case IPATH_CMD_TID_UPDATE:
1654 case IPATH_CMD_TID_FREE:
1655 copy = sizeof(cmd.cmd.tid_info);
1656 dest = &cmd.cmd.tid_info;
1657 src = &ucmd->cmd.tid_info;
1659 case IPATH_CMD_SET_PART_KEY:
1660 copy = sizeof(cmd.cmd.part_key);
1661 dest = &cmd.cmd.part_key;
1662 src = &ucmd->cmd.part_key;
1669 if ((count - consumed) < copy) {
1674 if (copy_from_user(dest, src, copy)) {
1683 case IPATH_CMD_USER_INIT:
1684 ret = ipath_do_user_init(pd, &cmd.cmd.user_info);
1687 ret = ipath_get_base_info(
1688 pd, (void __user *) (unsigned long)
1689 cmd.cmd.user_info.spu_base_info,
1690 cmd.cmd.user_info.spu_base_info_size);
1692 case IPATH_CMD_RECV_CTRL:
1693 ret = ipath_manage_rcvq(pd, cmd.cmd.recv_ctrl);
1695 case IPATH_CMD_PORT_INFO:
1696 ret = ipath_port_info(pd,
1697 (struct ipath_port_info __user *)
1698 (unsigned long) cmd.cmd.port_info);
1700 case IPATH_CMD_TID_UPDATE:
1701 ret = ipath_tid_update(pd, &cmd.cmd.tid_info);
1703 case IPATH_CMD_TID_FREE:
1704 ret = ipath_tid_free(pd, &cmd.cmd.tid_info);
1706 case IPATH_CMD_SET_PART_KEY:
1707 ret = ipath_set_part_key(pd, cmd.cmd.part_key);
1718 static struct class *ipath_class;
1720 static int init_cdev(int minor, char *name, struct file_operations *fops,
1721 struct cdev **cdevp, struct class_device **class_devp)
1723 const dev_t dev = MKDEV(IPATH_MAJOR, minor);
1724 struct cdev *cdev = NULL;
1725 struct class_device *class_dev = NULL;
1728 cdev = cdev_alloc();
1730 printk(KERN_ERR IPATH_DRV_NAME
1731 ": Could not allocate cdev for minor %d, %s\n",
1737 cdev->owner = THIS_MODULE;
1739 kobject_set_name(&cdev->kobj, name);
1741 ret = cdev_add(cdev, dev, 1);
1743 printk(KERN_ERR IPATH_DRV_NAME
1744 ": Could not add cdev for minor %d, %s (err %d)\n",
1749 class_dev = class_device_create(ipath_class, NULL, dev, NULL, name);
1751 if (IS_ERR(class_dev)) {
1752 ret = PTR_ERR(class_dev);
1753 printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
1754 "class_dev for minor %d, %s (err %d)\n",
1768 *class_devp = class_dev;
1777 int ipath_cdev_init(int minor, char *name, struct file_operations *fops,
1778 struct cdev **cdevp, struct class_device **class_devp)
1780 return init_cdev(minor, name, fops, cdevp, class_devp);
1783 static void cleanup_cdev(struct cdev **cdevp,
1784 struct class_device **class_devp)
1786 struct class_device *class_dev = *class_devp;
1789 class_device_unregister(class_dev);
1799 void ipath_cdev_cleanup(struct cdev **cdevp,
1800 struct class_device **class_devp)
1802 cleanup_cdev(cdevp, class_devp);
1805 static struct cdev *wildcard_cdev;
1806 static struct class_device *wildcard_class_dev;
1808 static const dev_t dev = MKDEV(IPATH_MAJOR, 0);
1810 static int user_init(void)
1814 ret = register_chrdev_region(dev, IPATH_NMINORS, IPATH_DRV_NAME);
1816 printk(KERN_ERR IPATH_DRV_NAME ": Could not register "
1817 "chrdev region (err %d)\n", -ret);
1821 ipath_class = class_create(THIS_MODULE, IPATH_DRV_NAME);
1823 if (IS_ERR(ipath_class)) {
1824 ret = PTR_ERR(ipath_class);
1825 printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
1826 "device class (err %d)\n", -ret);
1832 unregister_chrdev_region(dev, IPATH_NMINORS);
1837 static void user_cleanup(void)
1840 class_destroy(ipath_class);
1844 unregister_chrdev_region(dev, IPATH_NMINORS);
1847 static atomic_t user_count = ATOMIC_INIT(0);
1848 static atomic_t user_setup = ATOMIC_INIT(0);
1850 int ipath_user_add(struct ipath_devdata *dd)
1855 if (atomic_inc_return(&user_count) == 1) {
1858 ipath_dev_err(dd, "Unable to set up user support: "
1859 "error %d\n", -ret);
1862 ret = ipath_diag_init();
1864 ipath_dev_err(dd, "Unable to set up diag support: "
1865 "error %d\n", -ret);
1869 ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
1870 &wildcard_class_dev);
1872 ipath_dev_err(dd, "Could not create wildcard "
1873 "minor: error %d\n", -ret);
1877 atomic_set(&user_setup, 1);
1880 snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);
1882 ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
1883 &dd->cdev, &dd->class_dev);
1885 ipath_dev_err(dd, "Could not create user minor %d, %s\n",
1886 dd->ipath_unit + 1, name);
1891 ipath_diag_cleanup();
1898 void ipath_user_del(struct ipath_devdata *dd)
1900 cleanup_cdev(&dd->cdev, &dd->class_dev);
1902 if (atomic_dec_return(&user_count) == 0) {
1903 if (atomic_read(&user_setup) == 0)
1906 cleanup_cdev(&wildcard_cdev, &wildcard_class_dev);
1907 ipath_diag_cleanup();
1910 atomic_set(&user_setup, 0);